2018 Ford Focus ST Owners Manual - Switching Global Opening On and Off - Vehicles With: 12.3 Inch Instrument Cluster Display Screen

Switching Global Opening On and Off - Vehicles With: 12.3 Inch Instrument Cluster Display Screen

1. Press the menu button on the steering wheel to enter the information display main menu.

1. Select Settings.

1. Select Vehicle.

1. Select Windows.

1. Switch Remote Open on or off.

 Using Global Closing

WARNING:  When closing the power windows, verify they are free of obstruction and make sure that children and pets are not in the proximity of the window openings.

1. Press and hold the lock button on the remote control.

1. Release the button when the windows and moonroof start to close.

Press the lock or the unlock button on the remote control to stop global closing.

Note:   Bounce-back is on during global closing.   See   What Is Window Bounce-Back. 

SWITCHING GLOBAL CLOSING ON AND OFF - VEHICLES WITH: 4.2 INCH INSTRUMENT CLUSTER DISPLAY SCREEN



1. Using the information display controls on the steering wheel, select Settings.

1. Select Vehicle Settings.

1. Select Windows.

1. Switch Remote Close on or off.

SWITCHING GLOBAL CLOSING ON AND OFF - VEHICLES WITH: 12.3 INCH INSTRUMENT CLUSTER DISPLAY SCREEN



1. Press the menu button on the steering wheel to enter the information display main menu.

1. Select Settings.

1. Select Vehicle.

1. Select Windows.

1. Switch Remote Close on or off.

WHAT IS WINDOW BOUNCE-BACK



The window stops and reverses if it detects an obstruction when closing.

OVERRIDING WINDOW BOUNCE-BACK



WARNING:  If you override bounce-back, the window does not reverse if it detects an obstacle. Take care when closing the windows to avoid personal injury or damage to your vehicle.

1. Close the window until it reaches the point of resistance and let it reverse.

1. Lift the window control switch within five seconds to override bounce-back and close the window.Bounce-back is now disabled and you can close the window manually.

Note:   The window goes past the point of resistance and you can fully close it.

Note:   If the window does not close, have your vehicle checked as soon as possible.

RESETTING WINDOW BOUNCE-BACK



WARNING:  Bounce-back is off until you reset the memory. Take care when closing the windows to avoid personal injury or damage to your vehicle.

If you have disconnected the battery, you must reset the bounce-back memory separately for each window.

Carry out all steps within 30 seconds of starting the sequence.

1. Close the window.

1. Press and hold the window control switch until the window is fully open.Keep the switch pressed for a few seconds.

1. Lift and hold the switch until the window is fully closed.Keep the switch held for a few seconds.

1. Press and hold the switch until the window is fully open.Keep the switch pressed for a few seconds.

1. Lift and hold the switch until the window is fully closed.Keep the switch held for a few seconds.

Note:   Repeat the procedure if the window does not close when you use one-touch.

LOCKING THE REAR WINDOW CONTROLS



WARNING:  When children and pets are in the rear seat, use the power window lockout button to prevent accidental operation of the power windows.

Press the window control switch to lock or unlock the rear window controls. It illuminates when you lock the rear window controls.