Electric Parking Brake - Automatic Transmission
Your vehicle has an electric parking brake. You operate it with a switch instead of a lever. The switch is on the center console or to the left-hand side of the steering wheel, on the lower part of the instrument panel.
Note: The electric parking brake makes noises during operation. This is normal.
Applying the Electric Parking Brake
Note: It remains illuminated for a short period of time after you switch the ignition off.
If it continues to flash or does not illuminate, the system has malfunctioned. Have your vehicle checked as soon as possible.
Note: You can apply the electric parking brake when the ignition is off.
Note: The electric parking brake could automatically apply when you shift into park (P). See Automatic Transmission - 7-Speed Automatic Transmission/8-Speed Automatic Transmission.
Applying the Electric Parking Brake in an Emergency
Note: Do not apply the electric parking brake when your vehicle is moving, except in an emergency. If you repeatedly use the electric parking brake to slow or stop your vehicle, you could cause damage to the brake system.
You can use the electric parking brake to slow or stop your vehicle in an emergency.
The electric parking brake continues to slow your vehicle down unless you release the switch.
Manually Releasing the Electric Parking Brake
Switch the ignition on.
Press and hold the brake pedal.
If it remains illuminated or flashes, the system has malfunctioned. Have your vehicle checked as soon as possible.
Pulling Away on a Hill When Towing a Trailer
Press and hold the brake pedal.
Pull the switch upward and hold it.
Shift into gear.
Press the accelerator pedal until engine has developed sufficient torque to prevent your vehicle from rolling down the hill.
Automatically Releasing the Electric Parking Brake
Close the driver door.
Shift into gear.
Press the accelerator pedal and pull away in a normal manner.
The red warning lamp turns off.
If it remains illuminated or flashes, the electric parking brake has not released. Manually release the parking brake.
Releasing the Electric Parking Brake if the Vehicle Battery is Running Out of Charge
Connect a booster battery to the vehicle battery to release the electric parking brake if the vehicle battery is running out of charge. See Jump Starting the Vehicle.
Electric Parking Brake Information Messages
| Message | Action |
|---|---|
|
Park Brake Malfunction Service Now |
The electric parking brake has malfunctioned.Have your vehicle checked as soon as possible. |
|
Park Brake Not Released |
The electric parking brake has not released. Manually release the electric parking brake. If the message continues to appear, have your vehicle checked as soon as possible. |
|
Park Brake Not Applied |
The electric parking brake has not applied. Apply the electric parking brake. If the message continues to appear, have your vehicle checked as soon as possible. |
|
Park Brake Use Switch to Release |
The electric parking brake has not automatically released. Manually release the electric parking brake. |
|
To Release: Press Brake and Switch |
You have not pressed the brake pedal. Press the brake pedal to release the parking brake. |
|
Park Brake Limited Function Service Required |
The electric parking brake has malfunctioned.Have your vehicle checked as soon as possible. |
|
Park Brake System Overheated |
The electric parking brake has overheated. Wait for the electric parking brake to cool down. |
|
Park Brake Off |
The electric parking brake is released. |
|
Release Park Brake |
The electric parking brake has not released. Manually release the electric parking brake. If the message continues to appear, have your vehicle checked as soon as possible. |
|
Park Brake On |
The electric parking brake is applied. |
Download Manual