Intelligent Speed Limiter - Vehicles With: Lane Centering
Principle of Operation
The system allows you to limit the vehicle speed to the maximum speed limit detected by the speed sign recognition system. For example, if the speed sign recognition system detects a 80 km/h (50 mph) speed limit, the vehicle speed is limited to 80 km/h (50 mph). You can temporarily exceed the set speed if required, for example to overtake.
Note: The system does not limit the vehicle speed to speed limits shown with a supplementary traffic sign in the information display.
Using Intelligent Speed Limiter
The controls are on the steering wheel.
Switching Speed Limiter On and Off
Setting the Speed Limiter
Press the toggle button upward or downward with the system in standby mode to set the speed limiter to the current vehicle speed. The set speed is stored and displayed in the information display.
Note: The set speed limiter adjusts when the system detects a different maximum speed limit.
Note: If the system cannot detect a maximum speed limit, the system returns to standby mode.
You can adjust the set speed in small or large increments. Press the toggle button upward or downward once to adjust the set speed in small increments. Press and hold the toggle button upward or downward to adjust the set speed in large increments.
Canceling the Set Speed
Press to cancel the set speed limiter. The system returns to standby mode.
Note: The speed limiter icon and the set speed indicator are greyed out in standby mode.
Note: The system does not limit the vehicle speed in standby mode.
Resuming the Set Speed
Intentionally Exceeding the Speed Limit
Firmly press the accelerator pedal to temporarily exceed the set speed limit. The system resumes when the vehicle speed drops below the set speed limit, or when you press the RES button.
System Warnings
A warning appears in the information display if any of the following occur:
- The vehicle speed exceeds the current set speed.
- The system detects a maximum speed limit that is lower than the current vehicle speed.
- You intentionally exceed the set speed.
- You unintentionally exceed the set speed, for example when you are going downhill. A tone also sounds.
Note: A tone sounds if you continue to exceed the set speed.
Note: If the speed sign recognition system detects a speed limit outside the operational speed range, a tone sounds and the system returns to standby mode.
Adjusting Intelligent Speed Limiter Tolerance Settings
You can set a permanent speed tolerance that is in addition to the detected speed limit.
- Press the menu button on the steering wheel to enter the information display main menu.
- Select Settings.
- Select Driver Assistance.
- Select Speed Limiter.
- Select Intelligent.
- Select Tolerance.
- Select a setting and press the OK button.
Switching From Intelligent Speed Limiter to Speed Limiter
You can change between intelligent speed limiter and normal speed limiter using the information display. Intelligent speed limiter allows you to limit the vehicle speed to the maximum speed limit detected by the speed sign recognition system. Normal speed limiter allows you to manually limit the vehicle speed using controls on the steering wheel.
- Press the menu button on the steering wheel to enter the information display main menu.
- Select Settings.
- Select Driver Assistance.
- Select Speed Limiter.
- Select Normal or Intelligent.
Note: If you switch intelligent speed limiter off, the system defaults to manual speed limiter. You can manually set the speed limiter using the controls on the steering wheel.
Download Manual