Removing a Headlamp
 WARNING: Switch the lamps and the ignition off. Failure to do so could result in serious personal injury. WARNING: Lamps and associated components become hot when in use. Let them cool down before you remove them. |
- Use a suitable tool, for example a small flat blade screwdriver, to carefully raise the center pin and then remove the trim clip.
- Remove the screws that secure the lamp assembly.
- Carefully lift the rear of the headlamp up to disengage it from the lower fixing point.
- Remove the headlamp.
Note: Take care when removing the lamp. There are rupture points adjacent to the headlamp securing screws that are designed to separate under impact.
- Disconnect the electrical connector.
- To install, reverse the removal procedure.
Download Manual