Changing a Bulb
Use the correct specification bulb.See Bulb Specification Chart.
Headlamp
You may have to remove the headlamp assembly prior to replacing a bulb. See Removing a Headlamp.
Halogen Headlamp
| A |
| A B C |
Headlamp Low Beam
- Turn the cover counterclockwise and remove it.
- Press the clip to release the bulb holder.
- Remove the bulb by pulling it straight out.
- To install, reverse the removal procedure.
Note: Do not touch the bulb glass.
Headlamp High Beam
- Turn the cover counterclockwise and remove it.
- Press the clip to release the bulb holder.
- Remove the bulb by pulling it straight out.
- To install, reverse the removal procedure.
Note: Do not touch the bulb glass.
Daytime Running Lamp
These lamps have LEDs.
Note: We recommend that you have LEDs changed by an authorized dealer.
Front Direction Indicator
- Turn the cover counterclockwise and remove it.
- Turn the bulb holder counterclockwise and remove it.
- Press the bulb in and turn the bulb counterclockwise to remove it.
- To install, reverse the removal procedure.
LED Headlamp
| A |
These lamps have LEDs.
Note: We recommend that you have LEDs changed by an authorized dealer.
Front Fog Lamp
- Disconnect the electrical connector.
- Turn the bulb holder counterclockwise to remove the bulb.
Note: You cannot separate the bulb from the bulb holder.
- To install, reverse the removal procedure.
Note: Do not touch the bulb glass.
Note: Front fog lamps are also available as LED lamps.
Note: We recommend that you have LEDs changed by an authorized dealer.
Rear Lamp
Remove the rear lamp assembly prior to replacing any bulb. See Removing a Rear Lamp - 5-Door/Wagon.
See Removing a Rear Lamp - 4-Door.
| A B C |
Stoplamp
- Turn the bulb holder counterclockwise and remove it.
- Press the bulb in and turn the bulb counterclockwise to remove it.
- To install, reverse the removal procedure.
Rear Direction Indicator
- Turn the bulb holder counterclockwise and remove it.
- Press the bulb in and turn the bulb counterclockwise to remove it.
- To install, reverse the removal procedure.
Rear Lamp
- Turn the bulb holder counterclockwise and remove it.
- Press the bulb in and turn the bulb counterclockwise to remove it.
- To install, reverse the removal procedure.
Note: Rear lamps are also available as LED lamps.
Note: We recommend that you have LEDs changed by an authorized dealer.
Reversing Lamp and Rear Fog Lamp
These lamps have LEDs.
Note: We recommend that you have LEDs changed by an authorized dealer.
License Plate Lamp
These lamps have LEDs.
Note: We recommend that you have LEDs changed by an authorized dealer.
High Mounted Stoplamp
These lamps have LEDs.
Note: We recommend that you have LEDs changed by an authorized dealer.
Download Manual