Capacities and Specifications - 1.5L TiVCT
Use oil and fluid that meets the defined specification and viscosity grade.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:
- Component damage not covered by the vehicle Warranty.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced engine performance.
- Reduced fuel economy.
- Reduced brake performance.
Engine
Engine Oil
Capacities
| Variant | Including the Oil Filter | Excluding the Oil Filter |
|---|---|---|
| All. | 3.65 L (0.8 gal) | 3.5 L (0.8 gal) |
Note: The quantity of engine oil required to raise the indicated level on the dipstick from minimum to maximum is 0.6 L (0.1 gal).
Materials
| Name | Specification |
|---|---|
| Ford-Castrol Magnatec | WSS-M2C948-B |
Engine Oil Top-Up
If you are unable to find an engine oil that meets the specification defined by WSS-M2C948-B, you can top-up with a SAE 5W-20 engine oil that is defined by ACEA A5/B5.
Note: Do not use more than 0.6 L (0.1 gal) of the alternative engine oil between scheduled service intervals.
Engine Coolant
Capacities
| Variant | Quantity |
|---|---|
| All. | 6 L (1.3 gal) |
Materials
| Name | Specification |
|---|---|
| Antifreeze Super Plus Premium FU7J-19544-xx |
WSS-M97B44-D |
Fuel Tank
Capacities
| Variant | Quantity |
|---|---|
| All. | 52 L (11.4 gal) |
Washer Reservoir
Capacities
| Variant | Quantity |
|---|---|
| Vehicles without headlamp washers. | 4.2 L (0.9 gal) |
| Vehicles with headlamp washers. | 5.8 L (1.3 gal) |
Materials
| Name | Specification |
|---|---|
| Screen Wash FU7J-19C544-AA/BA/DA/EA/GA/HA |
WSS-M14P19-A |
Brake System
Materials
| Name | Specification |
|---|---|
| Brake Fluid DOT 4 LV High Performance BU7J-M6C65-xxxx |
WSS-M6C65-A2 |
Download Manual