Breaking-In
Tires
New tires need to be run-in for approximately 500 km (300 mi). During this time, you may experience different driving characteristics.
Brakes and Clutch
Avoid heavy use of the brakes and clutch if possible for the first 150 km (100 mi) in town and for the first 1,500 km (1,000 mi) on freeways.
Engine
Avoid driving too fast during the first 1,500 km (1,000 mi). Vary your speed frequently and change up through the gears early. Do not labor the engine.
Vehicles With a Diesel Engine
During the first 3,000 km (2,000 mi), you may notice a ticking sound when your vehicle slows down. This is due to adjustments of your new diesel engine and is normal.
Driving Through Water
 WARNING: Do not drive through flowing or deep water as you may lose control of your vehicle. |
Note: Driving through standing water can cause vehicle damage.
Note: Engine damage can occur if water enters the air filter.
Before driving through standing water, check the depth. Never drive through water that is higher than the bottom of the front rocker area of your vehicle.
When driving through standing water, drive very slowly and do not stop your vehicle. Your brake performance and traction may be limited.After driving through water and as soon as it is safe to do so:
- Lightly press the brake pedal to dry the brakes and to check that they work.
- Check that the horn works.
- Check that the exterior lights work.
- Turn the steering wheel to check that the steering power assist works.
Download Manual