Trail One Pedal Drive Limitations
Trail one pedal drive is unavailable when any of the following occur:
- Your vehicle is not in four-wheel drive high (4H) or four-wheel drive low (4L) modes.
- Using cruise control.
- Using trail control.
- You exceed 48 km/h (30 mph).
Releasing the accelerator pedal may allow your vehicle to come to a complete stop, some situations may require you to press the brake pedal to come to a complete stop.
SWITCHING TRAIL ONE PEDAL DRIVE ON AND OFF
Switching Trail One Pedal Drive On
Press the trail features button when in four-wheel drive high (4H) or four-wheel drive low (4L) to activate trail one pedal drive.
Switching Trail One Pedal Drive Off
Press the trail features button again to switch trail one pedal drive off.
Selecting a driveline mode other than four-wheel drive high (4H) or four-wheel drive low (4L) switches trail one pedal drive off.
If you exceed 68 km/h (42 mph) trail one pedal drive switches off.
  Pressing either button when trail one pedal drive is active turns trail control on and places trail one pedal drive into standby mode. |
Switching from Trail Control to Trail One Pedal Drive
 When using trail control in four-wheel drive high (4H) or four-wheel drive low (4L) modes, you can switch to trail one pedal drive by pressing the button on the steering wheel. |
TRAIL ONE PEDAL DRIVE INDICATORS
 When trail one pedal drive is active, the indicator displays green in the instrument cluster. When the system is switched on but is unavailable or in standby mode, it displays grey. |
TRAIL ONE PEDAL DRIVE – INFORMATION MESSAGES
| Message | Action |
|---|---|
|
Trail 1-Pedal Drive Active Use SET Button for Trail Control |
Displays when trail one pedal drive is active, use the SET+ or SET- to switch to trail control. |
|
Trail Control with Trail 1- Pedal Drive Off |
Displays when you switch trail one pedal drive off. |
|
Trail Control Enabled Use SET button to Set Speed Trail 1-Pedal Drive Available in 4H or 4L |
Trail control is in a driveline state not supported for trail one pedal drive. Set a speed to activate trail control or change the driveline state to four-wheel drive high (4H) or four-wheel drive low (4L) modes to active trail one pedal drive. |
| Trail Control Active Use CANCEL button to resume Trail 1-Pedal Drive | Displays when trail control is active and allows you to resume using trail one pedal drive when you press the CANCEL button. |
Download Manual