Enthusiast Network

Disclaimer: Not affiliated with or endorsed by Ford Motor Company. For informational purposes only. Full Disclaimer
Home Info Manuals Manuals 2022 Manuals 2022

2022 Ford Bronco Owners Manual - Switching Cruise Control On and Off



Owner’s Manuals 2022 Switching Cruise Control On and Off

Switching Cruise Control On and Off

WARNING   WARNING:  Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.

 The cruise controls are on the steering wheel.

Switching Cruise Control On

Cruise Control  Press the button to activate the system. When the system activates, the set speed is equal to the current vehicle speed or 20 km/h (15 mph), whichever is greater. If the speed is too low, or other conditions are not correct for cruise control activation, the system enters standby mode.  

Switching Cruise Control Off

Cruise Control  Press the button when the system is active or switch the ignition off.

Note:   When you switch cruise control off, the set speed clears.

WHAT IS CRUISE CONTROL

Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal.

Requirements

Use cruise control when the vehicle speed is greater than 20 km/h in metric units or 15 mph in imperial units.

SETTING THE CRUISE CONTROL SPEED

WARNING   WARNING:  When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes.

Drive to the speed you prefer.

Cruise Control SET+ Button  Cruise control SET Button  Press either the SET+ or SET- buttons to set the current speed.

Take your foot off the accelerator pedal.

Note:   The indicator changes color in the information display.

Changing the Set Speed

Cruise Control SET+ Button  Press the SET+ button to increase the set speed in small increments. Press and hold the SET+ button to accelerate. Release the button when you have reached your preferred speed. Cruise control SET Button  Press the SET- button to decrease the set speed in small increments. Press and hold the SET- button to decelerate. Release the button when you have reached your preferred speed.

Note:   If you accelerate by pressing the accelerator pedal, the set speed does not change.When you release the accelerator pedal, your vehicle returns to the speed that you previously set.

CANCELING THE SET SPEED

Cancel Resume Icon  Press the button, or tap the brake pedal to cancel the set speed.

Note:   The system remembers the set speed.

Note:   The system cancels if the vehicle speed drops below 16 km/h (10 mph) under the set speed when driving uphill.

RESUMING THE SET SPEED

Cancel Resume Icon  Press the button.

CRUISE CONTROL INDICATORS

Cruise Control  Illuminates when you switch the system on.