2022 Ford Bronco Owners Manual - Replacing the Rear Wiper Blades

Replacing the Rear Wiper Blades

1. Lift the wiper arm.

Note:   Do not hold the wiper blade to lift the wiper arm.

1. Remove the wiper blade.

Note:   Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached.

1. To install, reverse the removal procedure.

Note:   Make sure that the wiper blade locks into place.

Washer Precautions

WARNING:  If you operate your vehicle in temperatures below 5 °C (41 °F), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident.

Do not operate the washers when the washer reservoir is empty. This could cause the washer pump to overheat.

 Keep the outside of the windshield clean. The rain sensor is very sensitive and the wipers may operate if dirt, mist or insects hit the windshield.

Using the Windshield Washer

  Press and hold the button at the end of the lever to operate the windshield washer.

Note:   A courtesy wipe occurs a short time after the wipers stop to clear any remaining washer fluid when switched on.   See   Switching the Courtesy Wipe On and Off. 

Switching the Courtesy Wipe On and Off

1. Press Settings on the touchscreen.

1. Press Vehicle Settings.

1. Press Wipers.

1. Switch Courtesy Wipe on or off.