Disclaimer: Not affiliated with or endorsed by Ford Motor Company. For informational purposes only. Full Disclaimer

2022 Ford Bronco Owners Manual - Adding Engine Oil



Adding Engine Oil

WARNING   WARNING:  Do not remove the filler cap when the engine is running.
WARNING   WARNING:  Do not add engine oil when the engine is hot. Failure to follow this instruction could result in personal injury.

Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that the vehicle warranty may not cover.

  1. Clean the area surrounding the engine oil filler cap before you remove it.
  1. Remove the engine oil filler cap.
  1. Add engine oil that meets our specifications.See   Capacities and Specifications
  1. Reinstall the engine oil filler cap.Turn it clockwise until you feel a strong resistance.

Note:   Do not add oil further than the maximum mark.Oil levels above the maximum mark may cause engine damage.

Note:   Immediately soak up any oil spillage with an absorbent cloth.

RESETTING THE INTELLIGENT OIL LIFE MONITOR

Use the instrument cluster display controls on the steering wheel to reset the oil change reminder.

From the main menu scroll to:

Message   Action and Description  

Settings

Press the right arrow button, then from this menu scroll to the following message.  

Vehicle Maintenance

Press the right arrow button, then from this menu scroll to the following message.  

Oil Life Reset

Press the right arrow button, then from this menu scroll to the following message.  

Hold OK to Reset

Press and hold the OK button until the instrument cluster displays the following message.  

Reset Successful

When the oil change reminder resets the instrument cluster displays 100%.  

Remaining Life

{00}%

If the instrument cluster displays one of the following messages, repeat the process.  

Not Reset

Reset Cancelled

ENGINE OIL CAPACITY AND SPECIFICATION

For filling information, please refer to the Capacities and Specifications section of your owner's manual.  See   Capacities and Specifications


Download Manual