Hill start assist (vehicles with Twin Clutch SST)
The hill start assist makes it easy to start off on a steep uphill slope by preventing the vehicle from moving backwards. It keeps the braking force for about 2 seconds when you move your foot from the brake pedal to the accelerator pedal.
Caution
► Do not overly rely on the hill start assist to prevent backwards movement of the vehicle.
Under certain circumstances, even when hill start assist is activated, the vehicle may move backwards if the brake pedal is not sufficiently depressed, if the vehicle is heavily loaded, or if the road is very steep or slippery.
► The hill start assist is not designed to keep the vehicle stopped in place on uphill slopes for more than 2 seconds.
► When facing uphill, do not rely on using the hill start assist to maintain a stopped position as an alternative to depressing the brake pedal.
Doing so could result in an accident.
► Do not turn the ignition switch to the “LOCK” or “ACC” position while the hill start assist is operating. The hill start assist could stop operating, which could result in an accident.
To operate
1. Stop the vehicle completely using the brake pedal.
2. Release the brake pedal and the hill start assist will maintain the braking force applied while stopping for approximately 2 seconds.
3. Depress the accelerator pedal and the hill start assist gradually will decrease the braking force as the vehicle starts moving.
Note
► The hill start assist is activated when all of the following conditions are met.
• The engine is running.
(The hill start assist will not be activated while the engine is starting or immediately after the engine is started.)
• The gearshift lever is in any position other than “P” (PARK) or “N” (NEUTRAL).
• The vehicle is completely stationary, with the brake pedal depressed.
• The parking brake is released.
► The hill start assist will not operate if the accelerator pedal is depressed before the brake pedal is released.
► The hill start assist also operates when reversing on an uphill slope.
Warning display
If an abnormal condition occurs in the system, the following display/indicator will turn on.
- ASC indicator
Warning display
Caution
► If the warning is displayed, the hill start assist will not operate. Start off carefully.
► Park your vehicle in a safe place and stop the engine. Restart the engine and check whether the display/indicator goes out, in which case the hill start assist is again working normally.
If they remain displayed or reappear frequently, it is not necessary to stop the vehicle immediately, but the vehicle should be inspected by a MITSUBISHI MOTORS Authorized Service Point.
Download Manual