Headlamp levelling
Headlamp levelling switch
The angle of the headlamp beam varies depending on the load carried by the vehicle.
The headlamp levelling switch can be used to adjust the headlamp illumination distance (when the lower beam is illuminated) so that the headlamps’ glare does not distract other drivers.
Set the switch according to the following table.
Caution
► Always perform adjustments before driving.
Do not attempt to adjust while driving, as it could cause an accident.
1 person
Full luggage loading
Switch position 0- Driver only/Driver + 1 front passenger
Switch position 1- 5 passengers (including driver)
Switch position 2- 5 passengers (including driver) + Full luggage loading
Switch position 3- Driver + Full luggage loading
Automatic headlamp levelling
This mechanism automatically adjusts the direction of the headlamps (beam position) depending on changes in the condition of the vehicle, such as the number of occupants or luggage weight. When the headlamps are illuminated with the ignition switch in the “ON” position, the beam position of the headlamps is automatically adjusted when the vehicle is stopped.
Headlamp automatic levelling system warning display
If there is a fault in the automatic headlamp levelling system, the warning display is displayed on the information screen in the multi-information display.
Caution
► If the warning is displayed, the system may be malfunctioning. Have the vehicle inspected at a MITSUBISHI MOTORS Authorized Service Point.
Download Manual