Using Keyless Entry
Unlocking the Doors
With your passive key within 3 ft (1 m) of your vehicle, touch the unlock sensor on the back of the door handle for a brief period and then pull on the door handle to unlock, being careful not to touch the lock sensor at the same time or pull on the door handle too quickly. The intelligent access system requires a brief delay to authenticate your intelligent access key.
Using the Electronic Liftgate with Passive Key (If Equipped)
With your passive key within 3 ft (1 m) of your vehicle, press the exterior liftgate release button inside of the liftgate handle. The liftgate unlocks and opens. See Opening the Liftgate From Outside Your Vehicle - Vehicles With: Power Liftgate.
Locking the Doors
With your passive key within 3 ft (1 m) of your vehicle, touch the outer door handle lock sensor for approximately one second to lock, being careful not to touch the unlock sensor on the back of the door handle at the same time. After locking, you can immediately pull on the door handle to confirm locking occurred without inadvertently unlocking.
KEYLESS ENTRY – FREQUENTLY ASKED QUESTIONS
Why does the keyless entry system not function?
- If the system does not function it may be limited. See Keyless Entry Limitations. If the system still does not function use the remote control or the key blade to lock and unlock your vehicle.
Why can I not lock my vehicle?
- If you electronically lock your vehicle with a rear door or the liftgate open, the system searches for a passive key inside your vehicle after you close the last door. If the system detects a key, all doors unlock indicating that a key is inside. Your vehicle locks if another passive key is within the detection range after you close the last door.
Download Manual