Blind Spot Assist
WHAT IS BLIND SPOT ASSIST
Blind spot assist is an extension of the lane keeping system.
It may help you identify adjacent vehicles during a lane change.
Blind spot assist provides a blind spot warning and steering assistance to help you become aware of and steer away from vehicles in your blind spot during lane changes.
HOW DOES BLIND SPOT ASSIST WORK
During lane changes, the design of the blind spot assist feature detects vehicles in, or approaching, your blind spot and provides a warning, plus steering assistance to direct your vehicle back into your lane.
When active, this system functions with or without the use of turn signals and hazard flashers.
You must keep your hands on the steering wheel at all times.
BLIND SPOT ASSIST LIMITATIONS
All system limitations present in the basic lane keeping system also apply to blind spot assist.
Blind spot assist does not function under the following conditions:
- No lane markings are detected.
- One or both rear radar sensors become blocked or faulty.
- Attaching bike or cargo racks could cause false alerts due to obstruction of the sensor.
Blind spot assist may have difficulty detecting hazards under the following conditions:
- If a vehicle is approaching in an adjacent lane at a speed higher than your vehicle.
- Bad weather obstructing the sensors.
BLIND SPOT ASSIST INDICATORS
Diagram 1: Vehicle A uses its left turn signal preparing to change from the right lane to the middle lane. Vehicle B is already in the middle lane and just entered Vehicle A's blind spot causing the blind spot information system alert indicator to flash on the exterior mirror.
Diagram 2: The driver of Vehicle A begins to steer into the center lane not aware of Vehicle B.
Diagram 3: Blind spot assist counter steers to help alert the driver of Vehicle A to direct their vehicle back into the right lane to help avoid a possible collision with Vehicle B.
The lane keeping aid warning lamp or yellow lane marking in your instrument cluster display indicate blind spot assist activation. In addition, the blind spot information system alert indicator flashes on the exterior mirror on the same side as the detection. See Blind Spot Information System.
Blind Spot Assist Information Messages
| Message | Action |
|---|---|
|
Blind Spot Assist Not Available Trailer Attached |
Displays if you attach a trailer to your vehicle. |
|
Blind Spot Assist Not Available Side Sensor Blocked |
Displays if your blind spot information system sensors are blocked. |
|
Blind Spot Assist System fault |
The system has detected a fault that requires service.Have your vehicle checked as soon as possible. |
|
Trailer Brake Module Fault |
Lost communication with the trailer module. Blind spot assist is suppressed until the failure is fixed. |
|
Trailer Lighting Module Fault See Manual |
Lost communication with the trailer module. Blind spot assist is suppressed until the failure is fixed. |
|
Front Camera Fault Service Required |
Front camera fault. Blind spot assist is disabled until the failure is fixed. |
Download Manual