2023 Ford Expedition Owners Manual -  Keyless Entry Keypad Master Access Code

 Keyless Entry Keypad Master Access Code

Unlocking the Doors

Enter the factory-set five-digit code or your personal code.You must press each number within five seconds of each other.

• Press 3-4 within five seconds to unlock all doors.

Locking the Doors

Press and hold 7·8 and 9·0 at the same time with the driver door closed.

Note:   You do not need to enter the code first.

KEYLESS ENTRY KEYPAD PERSONAL ACCESS CODES

Programming a Personal Entry Code

1. Enter the five-digit master code.

1. Press 1·2 on the keypad within five seconds.

1. Enter your personal five-digit code.You must do this within five seconds of completing Step 2.

1. Press 1·2 on the keypad to save personal code 1.

The doors lock then unlock to confirm that programming was successful.

To program additional personal entry codes, repeat Steps 1 through 3, then for Step 4:

• Press 3·4 to save personal code 2.
• Press 5·6 to save personal code 3.
• Press 7·8 to save personal code 4.
• Press 9·0 to save personal code 5.

If your vehicle comes with the operating system, you can also program the system with one personal entry code.

Note:   Programming a code using the operating system overwrites any code that was already saved on the position 9·0 of the Keypad.

Hints:

• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The five-digit master code works even if you have set your own personal code.

Erasing a Personal Code

1. Enter the five-digit master code.

1. Press and release 1·2 on the keypad within five seconds.

1. Press and hold 1·2 for two seconds. You must do this within five seconds of completing Step 2.

All personal codes erase and only the five-digit master code works.

Anti-Scan Feature

 The keypad goes into an anti-scan mode if you enter the wrong code seven times. This mode turns off the keypad for one minute and the keypad lamp flashes.

The anti-scan feature turns off after:

• One minute of keypad inactivity.
• You press the unlock button on the remote control.
• You switch the ignition on.
• You unlock your vehicle using keyless entry.

USING THE KEYLESS ENTRY KEYPAD

Unlocking the Doors

Enter the factory-set five-digit code or your personal code.You must press each number within five seconds of each other.

• Press 3-4 within five seconds to unlock all doors.

Locking the Doors

Press and hold 7·8 and 9·0 at the same time with the driver door closed.

Note:   You do not need to enter the code first.

KEYLESS ENTRY KEYPAD – FREQUENTLY ASKED QUESTIONS

Why does the keypad not accept the access code?

• If you enter the access code too fast on the keypad, the unlock function may not work. Slowly re-enter the access code.

Why does the keypad not function?

• The keypad goes into an anti-scan mode if you enter a wrong code seven times. The anti-scan mode disables the keypad for one minute and the red light flashes.