Opening and Closing the Windows
Press the window control switch to open the window. Lift the window control switch to close the window.
Note: The power windows operate with the ignition on, and for several minutes after you switch the ignition off or until you open a front door.
To reduce wind noise or pulsing noise when one window is open, slightly open the opposite window.
One-Touch Open
Fully press the window control switch and release it. Press again or lift it to stop the window.
One-Touch Close
Fully lift the window control switch and release it. Press again or lift it to stop the window.
Resetting One-Touch Close
Carry out all steps within 30 seconds of starting the sequence.
- Close the window.
- Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a few seconds.
- Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a few seconds.
- Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a few seconds.
- Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a few seconds.
Note: Repeat the procedure if the window does not close when you use one-touch.
WHAT IS GLOBAL OPENING
You can use the remote control to open the windows with the ignition off.
Download Manual