Opening, closing the windows and moon roof
Power windows
The power windows can be opened and closed using the switches.
Operating the switch moves the side windows as follows:
*: To stop the side window partway, operate the switch in the opposite direction.
The engine switch is in ON.
The power windows can be oper- ated for approximately 45 seconds even after the engine switch is turned to ACC or OFF. They cannot, however, be operated once either front door is opened.
If an object becomes jammed between the side window and the
window frame while the side window is closing, side window movement is stopped and the side window is opened slightly.
If an object becomes caught between the door and side window while the side window is opening, side window movement is stopped.
When the jam protection function or catch protection function operates unusually and the side window can- not be opened and closed, perform the following operations with the power window switch of that door.
If you release the switch while the side window is moving, start again from the beginning.
If the side window reverses and cannot be fully closed or opened, have the vehicle inspected by your Toyota dealer.
*: These settings must be custom- ized at your Toyota dealer.
’ Vehicles without smart key system The buzzer sounds and a message is shown on the multi-information
display when the key has been
removed from the engine switch and the driver’s door is opened with the power windows open.
’ Vehicles with smart key system The buzzer sounds and a message is shown on the multi-information
display when the engine switch is
turned to OFF and the driver’s door is opened with the power windows open.
Settings (e.g. linked door lock oper- ation) can be changed. (Customiz- able features: P.686)
|
|
|
Observe the following precau- tions. Failing to do so may result in death or serious injury. Closing the power windows
The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows. It is possible for children and other passengers to have body parts caught in the power window. Also, when riding with a child, it is recommended to use the win- dow lock switch. (P.159)
Check to make sure that all pas- sengers do not have any part of their body in a position where it could be caught when a power window is being operated.
|
WARNING|
Preventing accidental operation (window lock switch) |
Press the switch.
The indicator will come on and the passenger windows will be locked.
The passenger windows can still be opened and closed using the driver’s switch even if the lock switch is on.
The engine switch is in ON.
The window lock switch is disabled. If necessary, press the window lock switch after reconnecting the bat- tery.
*: If equipped
The moon roof stops slightly before the fully open position to reduce wind noise.
Press the switch again to fully open the moon roof.
*: Lightly press either side of the moon roof switch to stop the moon roof partway.
*: Lightly press either side of the moon roof switch to stop the moon roof partway.
The engine switch is in ON.
The moon roof can be operated for approximately 45 seconds after the engine switch is turned to ACC or OFF. It cannot, however, be oper- ated once either front door is opened.
If an object is detected between the moon roof and the frame while the moon roof is closing or tilting down, travel is stopped and the moon roof opens slightly.
The sunshade can be opened and closed manually. However, the sun- shade will open automatically when the moon roof is opened.
*: These settings must be custom- ized at your Toyota dealer.
Perform the following procedure:
The moon roof will close, reopen and pause for approximately 10 sec- onds. Then it will close again and stop at the completely closed posi- tion.
*: If the switch is released at the incorrect time, the procedure will have to be performed again from the beginning.
If the moon roof does not fully close even after performing the above procedure correctly, have the vehi- cle inspected by your Toyota dealer.
If the moon roof does not open or close normally or the automatic opening function does not operate, perform the following initialization procedure.
The moon roof will stop at the tilt-up position. After that, it will open, close, tilt up, tilt down, and stop at the fully closed position.
*: If you release the switch while the moon roof is moving, perform the procedure again from the begin- ning.
If, after performing the above proce- dures correctly, the moon roof still does not open or close normally or
the automatic opening function does not operate, have the vehicle inspected by your Toyota dealer.
The buzzer sounds and a message is shown on the multi-information display when the engine switch is turned to OFF and the driver’s door is opened with the moon roof open.
Settings (e.g. linked door lock oper- ation) can be changed. (Customiz- able features: P.686)
|
|
|
Observe the following precau- tions. Failure to do so may cause death or serious injury. Opening the moon roof
Do not allow any passengers to put their hands or head outside the vehicle while it is moving.
Do not sit on top of the moon roof.
Opening and closing the moon roof
The driver is responsible for moon roof opening and closing operations.
In order to prevent accidental operation, especially by a child, do not let a child operate the moon roof. It is possible for chil- dren and other passengers to have body parts caught in the moon roof. |
WARNING*: If equipped
Slide and hold the switch
backward. The electronic sunshade will fully open automatically.
Slide and hold the switch for-
ward. The electronic sunshade will fully close automatically.
If the panoramic moon roof is not fully closed, it will close fully before the electronic sunshade closes.
*: Quickly slide and release the
switch in either direction to
stop the electronic sunshade partway.
When the panoramic moon roof is
tilted up, the electronic sunshade will open to the half-open position of the roof.
*: Lightly press the switch
again to stop the panoramic moon roof partway.
to tilt the panoramic moon roof down.
The panoramic moon roof can be tilted down only when it is in the tilt- up position.
Slide and hold the switch
backward. The panoramic moon roof and electronic sunshade will open automatically.
The panoramic moon roof can be opened from the tilt-up position.
*: Quickly slide and release the switch in either direction to
stop the panoramic moon roof partway.
Slide and hold the switch for-
ward. The panoramic moon roof will fully close automatically.
approximately 45 seconds after the engine switch is turned to ACC or OFF. They cannot, however, be operated once either front door is opened.
If an object is detected between the panoramic moon roof and the frame in the following situations, travel is stopped and the panoramic moon roof opens slightly.
Slide the switch forward.
The electronic sunshade will close to the half-open position and pause. The panoramic moon roof will then fully close. Then the electronic sun- shade will fully close.
*: These settings must be custom-
The engine switch is in ON.
The panoramic moon roof and elec- tronic sunshade can be operated for
ized at your Toyota dealer.
Perform the following procedure:
1 Stop the vehicle.
or switch forward. Continue
sliding and holding the switch for approximately 10 seconds after the panoramic moon roof or elec- tronic sunshade closes and reopens. The panoramic moon roof and electronic sunshade will start to close.*
*: If the switch is released at the incorrect time, the procedure will have to be performed again from the beginning.
If the panoramic moon roof or elec- tronic sunshade does not fully close even after performing the above procedure correctly, have the vehi- cle inspected by your Toyota dealer.
A buzzer sounds and a message is shown on the multi-information dis- play when the engine switch is turned to OFF and the driver’s door is opened with the panoramic moon roof open.
Settings (e.g. linked door lock oper- ation) can be changed. (Customiz- able features: P.686)
|
|
|
Observe the following precau- tions. Failure to do so may result in death or serious injury. |
WARNING
Driving 4
169
4-4. Refueling
.................................. 220
4-5. Using the driving support systems
Toyota Safety Sense 2.0
.................................. 223
PCS (Pre-Collision System)
.................................. 229
LTA (Lane Tracing Assist)
.................................. 238
RSA (Road Sign Assist)
.................................. 249
Dynamic radar cruise con- 4
trol with full-speed range
.................................. 251
BSM (Blind Spot Monitor)
.................................. 262
Intuitive parking assist . 271
Driving mode select switch
.................................. 352
170
Utility vehicle precautions
.................................. 371
Download Manual