Windows
OPENING AND CLOSING THE WINDOWS
Press the window control switch to open the window. Lift the window control switch to close the window.
Note: The power windows operate with the ignition on, and for several minutes after you switch the ignition off or until you open a front door.
To reduce wind noise or pulsing noise when one window is open, slightly open the opposite window.
ONE-TOUCH OPEN
Fully press the window control switch and release it. Press again or lift it to stop the window.
ONE-TOUCH CLOSE
Fully lift the window control switch and release it. Press again or lift it to stop the window.
RESETTING ONE-TOUCH CLOSE
Carry out all steps within 30 seconds of starting the sequence.
- Close the window.
- Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a few seconds.
- Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a few seconds.
- Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a few seconds.
- Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a few seconds.
Note: Repeat the procedure if the window does not close when you use one-touch.
WHAT IS GLOBAL OPENING
You can use the remote control to open the windows with the ignition off.
USING GLOBAL OPENING
- Press and release the unlock button on the remote control.
- Press and hold the unlock button on the remote control.
- Release the button when the windows start to open.
Press the lock or the unlock button on the remote control to stop global opening.
Note: You can use global opening for a short period of time when you unlock your vehicle using the remote control.
SWITCHING GLOBAL OPENING ON AND OFF
- Press Settings on the touchscreen.
- Press Vehicle Settings.
- Press Windows.
- Switch Remote Open on or off.
WHAT IS WINDOW BOUNCE-BACK
The window stops and reverses if it detects an obstruction when closing.
OVERRIDING WINDOW BOUNCE-BACK
- Close the window until it reaches the point of resistance and let it reverse.
- Lift and hold the window control switch within two seconds to override bounce-back and close the window.Bounce-back is now disabled and you can close the window manually.
Note: The window goes past the point of resistance and you can fully close it.
Note: If the window does not close, have your vehicle checked as soon as possible.
LOCKING THE REAR WINDOW CONTROLS
Download Manual