Capacities and specifications
ENGINE SPECIFICATIONS
| Engine | Specification |
|---|---|
| Compression ratio. | 10.5:1 |
| Displacement. | 213.4 in³ (3,497 cm³) |
| Firing order. | 1-4-2-5-3-6 |
| Ignition system. | Coil on plug |
| Spark plug gap. | 0.028 in (0.7 mm) - 0.031 in (0.8 mm) |
MOTORCRAFT PARTS
| Component | Motorcraft Part Number |
|---|---|
| Air filter element. | FA-1883 |
| Battery. | BAGM-49H8-850 |
| Cabin air filter. | FP-92 |
| Engine oil filter.1 | FL-500-S |
| Rear window wiper blade. | WW-1107 |
| Spark plug. | SP-596 |
| Windshield wiper blade. | WW-2248 |
1If a Motorcraft oil filter is not available, use an oil filter that aligns to SAE/USCAR – 36 Performance Specifications. Filter Type C.
We recommend Motorcraft parts that are available at your authorized dealer or at www.parts.ford.com. We engineer these parts for your vehicle to meet or exceed our specifications. Use of other parts could impact vehicle performance, emissions and durability. Your warranty could be void for any damage related to use of other parts.
ENGINE OIL CAPACITY AND SPECIFICATION
Use oil that meets the defined specification and viscosity grade.
If you do not use oil that meets the defined specification and viscosity grade, it could result in:
- Component damage that your vehicle warranty does not cover.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced vehicle performance.
- Reduced fuel economy.
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC.
We recommend Motorcraft® motor oil for your vehicle. If Motorcraft® oil is not available, use motor oils of the recommended viscosity grade that display the API Certification Mark for gasoline engines.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that your vehicle warranty does not cover.
CAPACITIES
| Variant | Including the Oil Filter |
|---|---|
| All. | 6.0 qt (5.7 L) |
Materials
| Name | Specification |
|---|---|
| Motorcraft® SAE 5W-30 Motor Oil XO-5W30-Q1SP, XO-5W30-Q1FS |
WSS-M2C961-A1 |
ALTERNATIVE ENGINE OIL FOR EXTREMELY COLD CLIMATES
To improve engine cold start performance, use the following engine oil in climates where the ambient temperature reaches -22.0 °F (-30 °C) or below.
Materials
| Name | Specification |
|---|---|
| Engine Oil - SAE 0W-30 | WSS-M2C963-A1 |
Note: If you use your vehicle regularly above the altitude of 5,000 ft (1,524 m) and under the temperature of -4.0 °F (-20 °C), it is recommended to use the alternative engine oil.
COOLING SYSTEM CAPACITY AND SPECIFICATION
Use coolant that meets the defined specification.
If you do not use coolant that meets the defined specification, it could result in:
- Component damage that your vehicle warranty does not cover.
- Reduced vehicle performance.
CAPACITIES
| Variant | Quantity |
|---|---|
| All. | 16.0 qt (15.1 L) |
Materials
| Name | Specification |
|---|---|
| Motorcraft® Yellow Prediluted Antifreeze/Coolant VC-13DL-G |
WSS-M97B57-A2 |
FUEL TANK CAPACITY
CAPACITIES
| Variant | Quantity |
|---|---|
| Base. | 24.7 gal (93.5 L) |
| Navigator L. | 30.1 gal (114 L) |
AIR CONDITIONING SYSTEM CAPACITY AND SPECIFICATION
Use refrigerant and oil that meets the defined specifications.
If you do not use refrigerant and oil that meets the defined specifications, it could result in:
- Component damage that your vehicle warranty does not cover.
- Reduced vehicle performance.
CAPACITIES
| Variant | Refrigerant | Refrigerant Oil |
|---|---|---|
| All. | 37 oz (1.05 kg) | 6.1 fl oz (180 ml) |
Materials
| Name | Specification |
|---|---|
| R-1234yf Refrigerant YN-33-A |
WSS-M17B21-A |
| Motorcraft® R-1234yf Refrigerant PAG Oil YN-35 |
WSS-M2C300-A2 |
WASHER FLUID SPECIFICATION
CAPACITIES
| Variant | Quantity |
|---|---|
| All. | Fill as required. |
Materials
| Name | Specification |
|---|---|
| Motorcraft® Premium Windshield Wash Concentrate with Bitterant ZC-32-B2 |
WSS-M14P19-A |
BRAKE FLUID SPECIFICATION
Use fluid that meets the defined specification and viscosity grade.
If you do not use fluid that meets the defined specification and viscosity grade, it could result in:
- Component damage that your vehicle warranty does not cover.
- Reduced brake performance.
Note: We recommend you use Dot 4 Low Viscosity (LV) High Performance Brake Fluid meeting WSS-M6C65-A2 specifications or ISO 4925 Class 6 standards. If you use any fluid other than the recommended fluid, it could cause reduced brake performance and not meet our performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials could result in brake system damage and possible failure.
CAPACITIES
| Variant | Quantity |
|---|---|
| All. | Fill as required. |
Materials
| Name | Specification |
|---|---|
| Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake Fluid PM-20 |
WSS-M6C65-A2 |
TRANSFER CASE FLUID CAPACITY AND SPECIFICATION
Use fluid that meets the defined specification and viscosity grade.
If you do not use fluid that meets the defined specification and viscosity grade, it could result in:
- Component damage that your vehicle warranty does not cover.
- Reduced vehicle performance.
CAPACITIES
| Variant | Quantity |
|---|---|
| Four-wheel drive. | 1.4–1.6 qt (1.3–1.5 L) |
Materials
| Name | Specification |
|---|---|
| Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC |
WSS-M2C938-A |
FRONT AXLE FLUID CAPACITY AND SPECIFICATION
Use fluid that meets the defined specification and viscosity grade.
If you do not use fluid that meets the defined specification and viscosity grade, it could result in:
- Component damage that your vehicle warranty does not cover.
- Reduced vehicle performance.
CAPACITIES
| Variant | Quantity |
|---|---|
| Four-wheel drive. | 1.8 qt (1.7 L) |
Materials
| Name | Specification |
|---|---|
| Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant XY-75W85-QL |
WSS-M2C942-A |
REAR AXLE FLUID CAPACITY AND SPECIFICATION
Use fluid that meets the defined specification and viscosity grade.
If you do not use fluid that meets the defined specification and viscosity grade, it could result in:
- Component damage that your vehicle warranty does not cover.
- Reduced vehicle performance.
CAPACITIES
| Variant | Quantity |
|---|---|
| All. | 2.00–2.25 qt (1.89–2.13 L) |
Materials
| Name | Specification |
|---|---|
| Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant XY-75W85-QL |
WSS-M2C942-A |
Download Manual