MANUAL PARK RELEASE
In order to move the vehicle in cases where the transmission will not shift out of PARK (P) (such as a depleted battery), a Manual Park Release is available.
Follow these steps to use the Manual Park Release:
- Firmly apply the parking brake.
- Open the center console and locate the Manual Park Release cover, remove it by snapping the cover away from the console hinges.
Manual Park Release Cover
- Press and maintain firm pressure on the brake pedal.
- Using a screwdriver or similar tool, push the metal latch in towards the tether strap.
Release Latch
- While the metal latch is in the open position, pull upward on the tether strap until the lever clicks and latches in the released position. The transmission is now out of PARK(P) and the vehicle can be moved.
Released Position
NOTE:
To prevent the vehicle from rolling unintentionally, firmly apply the parking brake.
To Disengage The Manual Park Release Lever:
- To disengage the Manual Park Release, apply tension upward while pushing the release latch towards the tether to unlock the lever.
Stowed Position
- Once the tension has been released and the lever has been unlocked, be sure it is stowed properly and locks into position.
Release Latch
NOTE:
Be sure to replace the cover by snapping it back in place.
Download Manual