STEERING WHEEL
This feature allows you to tilt the steering column upward
wheel outward or push it inward as desired. To lock the 3
or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column.
Tilt/Telescoping Lever
steering column in position, push the lever upward until fully engaged.
This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The power tilt/telescoping steering col- umn lever is located below the multifunction lever on the steering column.
Power Tilt/Telescoping Steering Column
To tilt the steering column, move the lever up or down as desired. To lengthen or shorten the steering column, pull the lever toward you or push the lever away from you as desired.
NOTE: For vehicles equipped with Driver Memory Seat, you can use your key fob or the memory switch on the driver’s door trim panel to return the tilt/telescopic steer- ing column to pre-programmed positions. Refer to “Driver Memory Seat” in this section for further information.
The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm.
The heated steering wheel control button is located on the center of the instrument panel below the touchscreen and within the climate or controls screen of the touchscreen.
Push the heated steering wheel button 
once to turn
the heating element on.
Push the heated steering wheel button 
a second time to turn the heating element off.
NOTE: The engine must be running for the heated steering wheel to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the heated steering wheel can be programmed to come on during a remote start.
This feature can be programmed through the Uconnect system. Refer to “Uconnect Settings” in “Multimedia” for further information.
Download Manual