2018 Acura NSX Owners Manual - Condition Indicators

Parking brake

If the indicator blinks, there is a problem with the electric parking brake.

Parking brake system

Avoid using the parking brake. Have your vehicle checked by an authorized Acura NSX dealer immediately.

Seat belt reminder

Make sure seat belts are fastened for you and any passenger. The indicator blinks and beeps sound continuously if you or your passenger has not fastened your seat belts when you begin driving. If the indicator remains on after seat belts are fastened, see your authorized Acura NSX dealer.

Low fuel

Refuel as soon as possible. If the indicator blinks, there is a problem with the fuel gauge. See your authorized Acura NSX dealer.

Low tire pressure

Stop in a safe place, check tire pressures, and inflate tire(s) if necessary.

Active Damper System

There is a problem with the Active Damper System.

System message

When a condition or malfunction indicator comes on, a message also appears on the driver information interface. Check the display for more information.

Immobilizer

Your remote transmitter cannot be recognized by the vehicle. If the indicator blinks, you may not be able to start the engine. Turn the vehicle off and then on again. If it continues to blink, there may be a problem with the system. See your authorized Acura NSX dealer.

Brake Wear Indicator*

Brake pads may need to be replaced. Avoid high speeds and sudden braking. Have your vehicle checked by an authorized Acura NSX dealer.

Ready Indicator

The vehicle is ready to drive.

Immobilizer/security system

Your key or remote transmitter cannot be recognized by the vehicle. If the indicator blinks, you may not be able to start the engine. Turn the power system off, press and hold the brake pedal, and restart the vehicle. If it continues to blink, there may be a problem with the system. See your dealer.

Canadian models: To reset the immobilizer system, follow the steps above after the battery has been disconnected and then reconnected.