2018 Acura MDX Owners Manual - Rear Seats

with second-row bench seat

Horizontal position adjustment

Pull up the bar to move the seat.

Seat-back angle adjustment

Pull up the lever to change the angle.

with second-row captain seats

Horizontal position adjustment

Pull up the bar to move the seat.

Seat-back angle adjustment

Pull up the lever to change the angle.

Separately fold down the left and right halves of the second-row seat to make room for cargo.

Models with second-row bench seat

Lever

1. Store the center seat belt by inserting the latch plate into the slot on the side of the anchor buckle.
2. Retract the seat belt into the holder on the ceiling.
3. Lower the center head restraint to its lowest position. Put the armrest back into the seat-back.

   All models

4. Pull up the seat-back angle adjustment lever.

To return the seat to its original position, pull up the seat-back to an upright position until it is securely latched into place. Reposition the seat belts as necessary.

Separately fold down the left and right halves of the third-row seat to make room for cargo.

Handle

1. Pull the handle on the seat-back. The head restraint folds down.
2. Push the seat-back forward while pulling the handle.

To return the seat to its original position, pull up the seat-back while pulling up the handle. Push the head restraint up to its original position.

Press the button on the second-row seat back or outer seat side. The second-row seat slides forward to allow easy access to the third row.

The button is inoperable when the vehicle is moving.