Temperature regulation
In the air conditioner menu or on the climate control bar
Adjust the temperature.
The air is cooled and dehumidified in cooling mode.
Apply temperature settings for the driver side to all seats.
Depending on the engine and vehicle equipment, the vehicle interior can be ventilated by the fan or the residual heat from the engine can be used to keep the vehicle interior warm when the ignition is switched off. This function is switched off after 30 minutes or if the 12 V vehicle battery charge level is low.
Switch the maximum cooling output on and off.
Air recirculation is switched on automatically and Climatronic automatically directs air to the upper body.
Setting the temperature on the Climatronic climate control bar
-
Turn the left knob or right knob.
The Climatronic displays the set temperatures.
Setting the temperature on the manual air conditioning climate control bar
-
Turn the left knob.
Maximum cooling output and heating output
-
Turn the left knob as far as it goes to
or 
.Or: to switch on the maximum cooling output of the Climatronic, press
on the climate control bar or tap in the Air conditioner menu.
Adjusting the temperature for the rear seats
-
Open the Air conditioner menu in the Infotainment system.
-
Tap the function key for the rear seats.
-
Tap the
or function key.Or: tap
or on the climate control bar for the rear seats.The set temperatures for the rear seats are shown on the climate control bar displays for the rear seats.
If 
is activated in the Infotainment system, the rear climate control bar cannot be used.
Download Manual