2019 Dodge Grand Caravan Owners Manual -  Voice recognition quick tips— if equipped

 Voice recognition quick tips— if equipped

The Uconnect Voice Command system allows you to control your AM, FM radio, disk player, USB mass storage class device, Apple® family of devices, Bluetooth® Streaming Audio Device, satellite radio, and a memo recorder.

Note:

Take care to speak into the Voice Interface System as calmly and normally as possible. The ability of the Voice Interface System to recognize user voice commands may be negatively affected by rapid speaking or a raised voice level.

WARNING:

Any voice commanded system should be used only in safe driving conditions following all applicable laws. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death.

When you push the Voice Recognition  button, you will hear a beep. The beep is your signal to give a command.

Note:

If you do not say a command within a few seconds, the system will present you with a list of options.

If you would like to interrupt the system while it lists options, push the Voice Recognition  button, listen for the beep, and say your command.

Pushing the Voice Recognition  button while the system is speaking is known as “barging in”. The system will be interrupted, and after the beep, you can add or change commands. This will become helpful once you start to learn the options.

Note:

At any time, you can say the words “Cancel,” “Help” or “Main Menu.”

These commands are universal and can be used from any menu. All other commands can be used depending upon the active application.

When using this system, you should speak clearly and at a normal speaking volume.

The system will best recognize your speech if the windows are closed, and the heater/air conditioning blower is set to low.

At any point, if the system does not recognize one of your commands, you will be prompted to repeat it.

To hear the first available Menu, push the Voice Recognition  button and say “Help” or “Main Menu”.

COMMANDS

The Voice Command system understands two types of commands, Universal commands, and Local commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active.

CHANGING THE VOLUME

1. Start a dialogue by pushing the Voice Recognition  button.

2. Say a command (e.g., “Help”).

3. Use the ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the Voice Recognition system is speaking. Please note the volume setting for Voice Recognition is different than the audio system.

MAIN MENU

Start a dialogue by pushing the Voice Recognition  button. You may say “Main Menu” to switch to the main menu.

In this mode, you can say the following commands:

• “Radio AM” (to switch to the radio AM mode)

• “Radio FM” (to switch to radio FM mode)

• “Sat” (to switch to Satellite radio mode)

• “Disc” (to switch to the disc mode)

• “USB” (to switch to USB mode)

• “Bluetooth® Streaming” (to switch to Bluetooth® Streaming mode)

• “Memo” (to switch to the memo recorder)

• “System Setup” (to switch to system setup)

RADIO AM

To switch to the AM band, say “AM” or “Radio AM”. In this mode, you may say the following commands:

• “Frequency #” (to change the frequency)

• “Next Station” (to select the next station)

• “Previous Station” (to select the previous station)

• “Radio Menu” (to switch to the radio menu)

• “Main Menu” (to switch to the main menu)

RADIO FM

To switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the following commands:

• “Frequency #” (to change the frequency)

• “Next Station” (to select the next station)

• “Previous Station” (to select the previous station)

• “Menu Radio” (to switch to the radio menu)

• “Main Menu” (to switch to the main menu)

SATELLITE RADIO

To switch to satellite radio mode, say “Sat” or “Satellite Radio.” In this mode, you may say the following commands:

• “Channel Number” (to change the channel by its spoken number)

• “Next Channel” (to select the next channel)

• “Previous Channel” (to select the previous channel)

• “List Channel” (to hear a list of available channels)

• “Select Name” (to say the name of a channel)

• “Menu Radio” (to switch to the radio menu)

• “Main Menu” (to switch to the main menu)

DISC MODE

To switch to the disc mode, say “Disc”. In this mode, you may say the following commands:

• “Track” (#) (to change the track)

• “Next Track” (to play the next track)

• “Previous Track” (to play the previous track)

• “Main Menu” (to switch to the main menu)

USB MODE

To switch to USB mode, say “USB”. In this mode, you may say the following commands:

• “Next Track” (to play the next track)

• “Previous Track” (to play the previous track)

• “Play” (to play an Artist Name, Playlist Name, Album Name, Track Name, etc.)

BLUETOOTH® STREAMING (BT) MODE

To switch to Bluetooth® Streaming (BT) mode, say “Bluetooth® Streaming”. In this mode, you may say the following commands:

• “Play” (to play the current track)

• “Pause” (to pause the current track)

• “Next Track” (to play the next track)

• “Previous Track” (to play the previous track)

MEMO MODE

To switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands:

• “New Memo” (to record a new memo) — During the recording, you may push the Voice Command  button to stop recording. You proceed by saying one of the following commands:

  • “Save” (to save the memo)

  • “Continue” (to continue recording)

  • “Delete” (to delete the recording)

   

• “Play Memos” (to play previously recorded memos) — During the playback you may push the Voice Command  button to stop playing memos. You proceed by saying one of the following commands:

  • “Repeat” (to repeat a memo)

  • “Next” (to play the next memo)

  • “Previous” (to play the previous memo)

  • “Delete” (to delete a memo)

  • “Delete All” (to delete all memos)

   

SETUP

To switch to system setup, you may say one of the following: