2020 Dodge Charger Owners Manual - DRIVER MEMORY SETTINGS — IF EQUIPPED

DRIVER MEMORY SETTINGS — IF EQUIPPED

This feature allows the driver to save up to two different memory profiles for easy recall through a memory switch. Each memory profile saves desired position settings for the following features:

Driver seat

Easy Entry/Exit seat operation (on/off) (if equipped)

Side mirrors

A set of desired radio station presets

Power tilt/telescoping steering column (if equipped)

Your vehicle is equipped with two key fobs, each can be linked to either memory position 1 or 2.

Be sure to program the radio presets prior to programming the memory settings.

The memory setting switch is located on the driver’s door trim panel. The switch consists of three buttons:

The set (S) button, which is used to activate the memory save function.

The (1) and (2) buttons which are used to recall either of two pre-programmed memory profiles.

Memory Setting Switches

To create a new memory profile, perform the following:

Saving a new memory profile will erase the selected profile from memory.

Place the vehicle’s ignition in the ON/RUN position.

Adjust all memory profile settings to desired preferences (i.e., seat, side mirror, power tilt and telescopic steering column (if equipped), and radio station presets).

Push the set (S) button on the memory switch, and then push the desired memory button (1 or 2) within five seconds. The instrument cluster display will display which memory position is being set.

Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to recall a memory profile.

Your remote keyless entry key fob can be programmed to recall one of two saved memory profiles with a push of the unlock button on the key fob.

Before programming your key fobs you must select the“Personal Settings Linked To Fob” feature through the Uconnect system. Refer to“Uconnect Settings” in“Multimedia” for further information.

To program your key fob, perform the following:

Place the vehicle’s ignition in the OFF position.

Select the desired memory profile 1 or 2.

Push and release the set (S) button on the memory switch, then within five seconds push and release the button labeled (1) or

(2) accordingly.“Memory Profile Set”

(1 or 2) will display in the instrument cluster display.

Push and release the lock button on the key fob within 10 seconds.

Your key fob can be unlinked to your memory settings by pushing the set (S) button, followed by pushing the unlock button on the key fob within 10 seconds.

NOTE:

If a recall is attempted when the vehicle is not in PARK, a message will display in the instrument cluster display.

To recall the memory settings for driver one or two, push the desired memory button number (1 or 2) or the unlock button on the key fob linked to the desired memory position.

If the vehicle is equipped with Passive Entry, the memory settings are recalled when using Passive Entry to unlock the driver's door with a linked key fob.

A recall can be canceled by pushing any of the memory buttons (S, 1, or 2) during a recall.

When a recall is canceled, the driver seat will stop moving. A delay of one second will occur before another recall can be selected.