FLUIDS AND LUBRICANTS — SRT
|
Component |
Fluid, Lubricant, or Genuine Part |
|
Engine/Intercooler Coolant |
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT coolant conforming to MS.90032. |
|
Engine Oil |
For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils. The manufacturer recommends the use of Pennzoil Ultra Platinum 0W-40 or equivalent Mopar engine oil meeting the requirements of FCA Material Standard MS-12633 for use in all operating temperatures. |
|
Engine Oil Filter |
Mopar Engine Oil Filter or equivalent. |
|
Spark Plugs |
We recommend you use Mopar Spark Plugs. |
|
Fuel Selection |
91 Octane or higher (R+M)/2 Method, 0-15% Ethanol. |
(Continued)
(Continued)
8
|
Component |
Fluid, Lubricant, or Genuine Part |
|
Automatic Transmission |
Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. |
|
Brake Master Cylinder |
We recommend you use Mopar DOT 3 brake fluid. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. DOT 4 brake fluid must be changed every 24 months. This interval is time based only, mileage intervals do not apply. |
|
Hydraulic Power Steering Reservoir — If Equipped |
We recommend you use Mopar Hydraulic System Power Steering Fluid or equivalent meeting the requirements of FCA Material Standard MS-10838. |
|
Rear Axle |
We recommend you use Mopar LSD Synthetic Gear Lubricant SAE 75W85 (API GL-5). |
Download Manual