Enthusiast Network

Disclaimer: Not affiliated with or endorsed by Nissan Motor Company. For informational purposes only. Full Disclaimer
Home Info Manuals Manuals 2017 Manuals 2017

2017 Nissan Rogue Owners Manual - Ignition switch (if so equipped)



Owner’s Manuals 2017 Ignition switch (if so equipped)

Ignition switch (if so equipped)

WARNING
  •  Never remove or turn the key to the LOCK position while driving. The steering wheel will lock (for models with a steering lock mechanism). This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury.
  •  Never place the ignition switch in the LOCK position while driving. The steering wheel will lock (for models with a steering lock mechanism). This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury.

Continuously Variable Transmission (CVT)

Continuously Variable Transmission (CVT)
Continuously Variable Transmission (CVT)

The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the shift lever is moved to the P (Park) position.

  •  When moving the ignition switch to the LOCK position, make sure the shift lever is in the P (Park) position.
  •  When removing the key from the ignition switch, make sure the shift lever is in the P (Park) position.

When the ignition switch cannot be turned to the LOCK position:

  1.  Shift the shift lever to the P (Park) position.
  2.  Turn the ignition switch slightly in the ON direction.
  3.  Turn the ignition switch to the LOCK position.
  4.  Remove the key if it is inserted in the ignition switch.

If the ignition switch is turned to the LOCK position, the shift lever cannot be moved from the P (Park) position.

The shift lever can be moved if the ignition switch is placed in the ON position and the foot brake pedal is depressed.

Key positions

LOCK: Normal parking position (0)

OFF: (Not used) (1)

This position activates electrical accessories such as the radio when the engine is not running.

ON: Normal operating position (3)

This position turns on the ignition system and the electrical accessories.

START: (4)

This position starts the engine. As soon as the engine has started, release the key. It automatically returns to the ON position.

NISSAN vehicle immobilizer system

The NISSAN Vehicle Immobilizer system will not allow the engine to start without the use of the registered key.

If the engine fails to start using a registered key (for example, when interference is caused by another registered key, an automated toll road device or automatic payment device on the key ring), restart the engine using the following procedure:

  1.  Leave the ignition switch in the ON position for approximately 5 seconds.
  2.  Place the ignition switch in the OFF or LOCK position, and wait approximately 10 seconds.
  3.  Repeat Steps 1 and 2.
  4.  Restart the engine while holding the device (which may have caused the interference) separate from the registered key.

If the no start condition re-occurs, NISSAN recommends placing the registered key on a separate key ring to avoid interference from other devices.

Previous Next

Download Manual