Disclaimer: Not affiliated with or endorsed by Nissan Motor Company. For informational purposes only. Full Disclaimer

2017 Nissan Rogue Owners Manual - Heater and Air Conditioner (automatic) (if so equipped)



Heater and Air Conditioner (automatic) (if so equipped)

Heater and Air Conditioner
Heater and Air Conditioner

  1.  (front defroster) button
  2.  Temperature control dial (driver’s side) / ON-OFF button
  3.  MODE (manual air flow control) button
  4.  Display screen
  5.  A/C (air conditioner) button
  6.  Temperature control dial (passenger’s side)/DUAL (passenger’s side temperature control) button
  7.   (rear window and outside mirror (if so equipped) defroster) button
  8.   Fresh air intake button
  9.  AUTO (automatic mode) button
  10.   (fan speed control) buttons
  11.   Air recirculation button
WARNING
  •  The air conditioner cooling function operates only when the engine is running.
  •  Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.
  •  Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.

NOTE:

  •  Odors from inside and outside the vehicle can build up in the air conditioner unit. Odor can enter the passenger compartment through the vents.
  •  When parking, set the heater and air conditioner controls to turn off air recirculation to allow fresh air into the passenger compartment.

    This should help reduce odors inside the vehicle.

Automatic operation

Cooling and/or dehumidified heating (AUTO)

This mode may be used all year round as the system automatically works to keep a constant temperature. Air flow distribution and fan speed are also controlled automatically.

  1.  Press the AUTO button on. The indicator on the button will illuminate.
  2.  Turn the temperature control dial to the left or right to set the desired temperature.
  •  The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically.
  •  A visible mist may be seen coming from the vents in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.
  1.  You can individually set driver’s and front passenger’s side temperature using each temperature control dial. When the DUAL button or passenger’s side temperature dial is turned, the DUAL indicator will come on.

    To turn off the passenger’s side temperature control, press the DUAL button.

Heating (A/C OFF)

The air conditioner does not activate. When you need to heat only, use this mode.

  1.  Press the A/C button.
  2.  Turn the temperature control dial to set the desired temperature.
  •  The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically.
  •  Do not set the temperature lower than the outside air temperature. Otherwise, the system may not work properly.
  •  Not recommended if windows fog up.

Dehumidified defrosting or defogging

  1.  Press the  front defroster button on.

    The indicator light on the button will come on.

  2.  Turn the temperature control dial to set the maximum temperature to aid in defrosting or defogging.
  •  To quickly remove ice from the outside of the windows, use the fan speed control dial to set the fan speed to maximum.
  •  As soon as possible after the windshield is clean, press the AUTO button to return to the automatic mode.
  •  When the  front defroster button is pressed, the air conditioner will automatically be turned on at outside temperatures above 36°F (2°C). The air recirculate mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.

    When the air recirculate mode automatically turns off, the air fresh mode will automatically turn on.

Manual operation

Fan speed control

Press the fan control buttons  to manually control the fan speed.

Press the AUTO button to return to automatic control of the fan speed.

Air recirculation

Press the  air recirculation button to recirculate interior air inside the vehicle. The  indicator light on the button will come on.

The air recirculation cannot be activated when the air conditioner is in the  front defrosting mode.

Fresh air intake

Press the  fresh air intake button to draw outside air into the passenger compartment.

The  indicator light on the button will come on.

Air flow control

Pressing the MODE button manually controls air flow and selects the air outlet:

— Air flows mainly from center and side vents.
 — Air flows mainly from center and side vents and foot outlets.
 — Air flows mainly from foot outlets and partly from defroster.
 — Air flows mainly from defroster and foot outlets.

To turn system off

Press the OFF button.

Rear window and outside mirror (if so equipped) defroster button

For additional information, refer to “Rear window and outside mirror (if so equipped) defroster switch” in the “Instruments and controls” section of this manual.

Operating tips

  • When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate for a maximum of 150 seconds. However, this is not a malfunction. After the coolant temperature warms up, air flow from the foot outlets will operate normally.
  • Keep the moonroof closed while the air conditioner is in operation.
  •  If you feel that the air flow mode you have selected and the outlets the air is coming out do not match, select the  mode.
  •  When you change the air flow mode, you may feel air flow from the feet vents for just a moment. This is not a malfunction.

Operating tips

The sunload sensor, located on the top and center of the instrument panel, helps the system maintain a constant temperature. Do not put anything on or around this sensor.


Download Manual