Windows
Opening and Closing the Windows
 WARNING: Do not leave children or pets unattended in your vehicle and do not let children play with the power windows. Failure to follow this instruction could result in personal injury or death. WARNING: When closing the power windows, verify that they are free of obstructions and make sure children and pets are not in the proximity of the window openings. Failure to follow this instruction could result in personal injury or death. WARNING: If an obstruction is detected, release the switch and reverse the window immediately. Failure to follow this instruction could result in personal injury or death. WARNING: Do not leave a key or remote control unattended in the vehicle. Children or pets could operate the power windows and could become trapped in a closing window. Failure to follow this instruction could result in personal injury or death. |
Note: The power windows operate with the ignition on, and for several minutes after you switch the ignition off or until you open a front door.
To reduce wind noise or pulsing noise when one window is open, slightly open the opposite window.
One-Touch Open (If Equipped)
Fully press the window control switch and release it. Press again or lift it to stop the window.
One-Touch Close (If Equipped)
Fully lift the window control switch and release it. Press again or lift it to stop the window.
Resetting One-Touch Close
Carry out all steps within 30 seconds of starting the sequence.
- Close the window.
- Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a few seconds.
- Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a few seconds.
- Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a few seconds.
- Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a few seconds.
Note: Repeat the procedure if the window does not close when you use one-touch.
Accessory Delay
The window switches remain operational for several minutes when you switch the ignition off or until you open either front door.
What Is Global Opening
You can use the remote control to open the windows with the ignition off.
Using Global Opening
- Press and release the unlock button on the remote control.
- Press and hold the unlock button on the remote control.
- Release the button when the windows start to open.
Press the lock or the unlock button on the remote control to stop global opening.
Note: You can use global opening for a short period of time when you unlock your vehicle using the remote control.
Switching Global Opening On and Off
- Press Settings on the touchscreen.
- Press Vehicle Settings.
- Press Windows.
- Switch Remote Open on or off.
What Is Window Bounce-Back
The window stops and reverses if it detects an obstruction when closing.
Overriding Window Bounce-Back
| WARNING: If you override bounce-back, the window does not reverse if it detects an obstacle. Take care when closing the windows to avoid personal injury or damage to your vehicle. |
- Close the window until it reaches the point of resistance and let it reverse.
- Lift and hold the window control switch within two seconds to override bounce-back and close the window.Bounce-back is now disabled and you can close the window manually.
Note: The window goes past the point of resistance and you can fully close it.
Note: If the window does not close, have your vehicle checked as soon as possible.
Locking the Rear Window Controls
| WARNING: When children and pets are in the rear seat, use the power window lockout button to prevent accidental operation of the power windows. |
 Press the window control switch to lock or unlock the rear window controls. It illuminates when you lock the rear window controls. |
Download Manual