Electric Parking Brake
What Is the Electric Parking Brake
The electric parking brake is used to hold your vehicle on slopes and flat roads.
Applying the Electric Parking Brake
 WARNING: Apply the parking brake and make sure your vehicle is in park (P). Power the vehicle off and remove the keys or remote control whenever you leave your vehicle. Failure to follow this instruction could result in personal injury or death. WARNING: If you drive extended distances with the parking brake applied, you could cause damage to the brake system. WARNING: The electric parking brake does not operate if the vehicle battery has run out of charge. WARNING: If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. Have your vehicle checked as soon as possible. |
- Pull the switch up.
The red warning lamp flashes during operation and illuminates when the parking brake is applied.
Note: You can apply the electric parking brake when the ignition is off.
Note: The electric parking brake could apply when you shift into park (P).
Applying the Electric Parking Brake in an Emergency
You can use the electric parking brake to slow or stop your vehicle in an emergency.
Pull the switch up and hold it.
The red warning lamp illuminates, a tone sounds and the stoplamps turn on when you use the electric parking brake in an emergency.
The electric parking brake continues to slow your vehicle down unless you release the switch.
Note: Do not apply the electric parking brake when your vehicle is moving, except in an emergency. If you repeatedly use the electric parking brake to slow or stop your vehicle, you could cause damage to the brake system.
Manually Releasing the Electric Parking Brake
- Switch the ignition on.
- Press and hold the brake pedal.
- Push the switch down.
The red warning lamp turns off.
Pulling Away When Towing a Trailer Uphill
- Press and hold the brake pedal.
- Pull the switch upward and hold it.
- Shift into gear.
- Press the accelerator pedal until engine has developed sufficient torque to prevent your vehicle from rolling down the hill.
- Release the switch and pull away in a normal manner.
Automatically Releasing the Electric Parking Brake
- Close the driver door.
- Shift into gear.
- Press the accelerator pedal and pull away in a normal manner.
Electric Parking Brake Audible Warning
Sounds when the parking brake is on and your vehicle is moving. If the warning tone continues after you have released the parking brake, this indicates a malfunction. Have your vehicle checked as soon as possible.
Releasing the Electric Parking Brake if the Vehicle Battery Has Run Out of Charge
| WARNING: The electric parking brake does not operate if the vehicle battery has run out of charge. |
Connect a booster battery to the vehicle battery to release the electric parking brake if the vehicle battery has run out of charge.
Electric Parking Brake – Warning Lamps
Brake System
Note: Lamps may vary depending on region.
Electric Parking Brake
| |
 When the lamp illuminates yellow, it indicates a malfunction in the electric parking brake. Have your vehicle checked as soon as possible. |
Note: Lamps may vary depending on region.
Electric Parking Brake – Information Messages
Park Brake
| Message | Action | |
|---|---|---|
|
Park Brake Engaged |
The electric parking brake is set, the engine is running and you drive your vehicle more than 3 mph (5 km/h). If the warning stays on after the electric parking brake is released, have the system checked as soon as possible. | |
|
To Release: Press Brake and Switch |
The electric parking brake is set and a manual release is attempted without the brake pedal being pressed. | |
|
Park Brake Use Switch to Release |
The electric parking brake is set and an automatic release is attempted but cannot be performed. Perform a manual release. | |
|
Release Park Brake |
The electric parking brake is set and your vehicle speed exceeds 3 mph (5 km/h). Release the electric parking brake before continuing to drive. | |
|
Park Brake Not Applied |
The electric parking brake is not fully applied. | |
|
Park Brake Not Released |
The electric parking brake is not fully released. | |
|
Brake maintenance mode |
The electric parking brake system has been put into a special mode to allow brake service. Have the system checked as soon as possible. | |
|
Park Brake Limited Function Service Required |
The electric parking brake system has detected a condition that requires service. Some functionality may still be available. Have the system checked as soon as possible. | |
|
Park Brake Malfunction Service Now |
The electric parking brake system has detected a condition that requires service. Have the system checked as soon as possible. | |
|
Park Brake System Overheated |
Numerous electric parking brake applies have overheated the system. Wait 2 minutes before attempting to apply again. | |
Download Manual