Climate Control
Switching Climate Control On and Off
Switching Recirculated Air On and Off
Press the touchscreen to recirculate air currently in the passenger compartment.
Note: Recirculated air may turn off, or prevent you from switching on, in all air flow modes except MAX A/C to reduce the risk of fogging. Recirculation may also turn on and off in various air distribution control combinations during hot weather to improve cooling efficiency
Note: Recirculated air could turn off or be prevented from turning on in all air flow modes except maximum cooling to reduce the risk of the windows fogging up.
Note: Recirculated air could turn on and off when you direct air to the instrument panel or footwell air vents during hot weather to improve cooling efficiency.
Switching Air Conditioning On and Off
Press the touchscreen.
Note: Under certain conditions, the air conditioning compressor could continue to operate after you switch air conditioning off.
Switching Maximum Defrost On and Off
Press the button.
Note: When you switch maximum defrost on, the heated windshield, heated rear window and air conditioning turn on. The blower motor is set to the highest speed.
Note: When you switch maximum defrost off, the heated windshield and heated rear window remain on.
Switching Maximum Cooling On and Off
Press the touchscreen.
Note: When you switch maximum cooling off, air conditioning remains on.
Switching the Heated Rear Window On and Off
Press the touchscreen to clear the rear window of thin ice and fog.The heated rear window turns off after a short period of time.
Note: Do not use harsh chemicals, razor blades or other sharp objects to clean or remove decals from the inside of the heated rear window as this could cause damage to the heated rear window grid lines not covered by the vehicle Warranty.
Setting the Blower Motor Speed
|
|
Switching the Heated Mirrors On and Off
Setting the Temperature
Press the touchscreen temperature controls on either side of the climate control to set the temperature for that side.
Slide the control to set the temperature.
Note: This control also sets the right-hand side temperature when you switch off dual zone mode.
Directing the Flow of Air
Directing Air to the Windshield Air Vents
Directing Air to the Instrument Panel Air Vents
Directing Air to the Footwell Air Vents
Switching Auto Mode On and Off
Press the touchscreen to switch auto mode on. Repeatedly press the button to adjust auto mode.
Note: When you switch auto mode on, lights on the blower motor control do not illuminate to indicate the blower motor speed.
Adjust the blower motor control or air distribution control to switch auto mode off.
Switching Dual Mode On and Off
Climate Control Hints
General Hints
- Prolonged use of recirculated air may cause the windows to fog up.
- You may feel a small amount of air from the footwell air vents regardless of the air distribution setting.
- To reduce humidity build-up inside your vehicle, do not drive with the system switched off or with recirculated air always switched on.
- Do not place objects under the front seats as this may interfere with the airflow to the rear seats.
- Remove any snow, ice or leaves from the air intake area at the base of the windshield.
- To improve the time to reach a comfortable temperature in hot weather, drive with the windows open until you feel cold air through the air vents.
Automatic Climate Control
- Adjusting the settings when your vehicle interior is extremely hot or cold is not necessary. Automatic mode is best recommended to maintain set temperature.
- The system adjusts to heat or cool the interior to the temperature you select as quickly as possible.
- For the system to function efficiently, the instrument panel and side air vents should be fully open.
- If you press AUTO during cold outside temperatures, the system directs air flow to the windshield and side window air vents.In addition, the blower motor may run at a slower speed until the engine warms up.
- If you press AUTO during hot temperatures and the inside of the vehicle is hot, the system uses recirculated air to maximize interior cooling. Blower motor speed may also reduce until the air cools.
Quickly Heating the Interior
- Press AUTO.
- Adjust the temperature function to the setting you prefer.
Recommended Settings for Heating
- Press AUTO.
- Adjust the temperature function to the setting you prefer. Use 72 °F (22 °C) as a starting point, then adjust the setting as necessary.
Quickly Cooling the Interior
- Press MAX A/C.
- Drive with the windows open for a short period of time.
Recommended Settings for Cooling
- Press AUTO.
- Adjust the temperature function to the setting you prefer. Use 72 °F (22 °C) as a starting point, then adjust the setting as necessary.
Defogging the Side Windows in Cold Weather
- Press and release defrost or maximum defrost.
- Adjust the temperature control to the setting you prefer. Use 72 °F (22 °C) as a starting point, then adjust the setting as necessary.
Download Manual