Mirrors
The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window.
Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
Note:
A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the windshield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting. The mirror head can be adjusted left and right and tilted up and down for various drivers. The mirror should be adjusted to center on the view through the rear window.
Adjusting Rearview Mirror
AUTOMATIC DIMMING MIRROR — IF EQUIPPED
A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the windshield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting. The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window.
This mirror automatically adjusts for headlight glare from vehicles behind you.
Note:
-
The Automatic Dimming Mirror feature is disabled when the vehicle is in REVERSE to improve rear view viewing.
-
The Automatic Dimming Mirror feature can be turned on or off using the Uconnect system. Refer to “Uconnect Settings” in “Multimedia” for further information.
Automatic Dimming Mirror
CAUTION:
To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.
AUTOMATIC DIMMING MIRROR WITH REAR VIEW CAMERA DISPLAY — IF EQUIPPED
A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the windshield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting. The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window.
This mirror automatically adjusts for headlight glare from vehicles behind you.
When the vehicle is placed in REVERSE, a video display illuminates to display the image generated by the rear view camera located on the liftgate handle. The auto dimming feature is also disabled to improve rear view viewing.
Automatic Dimming Mirror With Rear View Camera
OUTSIDE MIRRORS
To receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror.
Note:
The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle.
WARNING:
Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger side convex mirror.
OUTSIDE MIRRORS FOLDING FEATURE
All outside mirrors are hinged and may be moved either forward or rearward to resist damage. The hinges have three detent positions:
-
Full forward position
-
Full rearward position
-
Normal position
INTERIOR OBSERVATION MIRROR
The convex interior observation mirror provides the driver and front seat passenger a wide field of view to conveniently view passengers sitting in the rear passenger seats. To use the interior observation mirror, push on the raised bars on the compartment door and release (the door will swing downward), then raise the door until it is almost closed and release. The door will latch in position to use the interior observation mirror.
Note:
From the “observation mirror” position, the door can only be closed.
To return to the full open position, the door must first be closed and then opened by pushing the latch again to release.
Observation Mirror
POWER MIRRORS
The power mirror switch is located on the driver's door trim panel.
Power Mirror Switches
Models Without Express Window Feature
Push the mirror select button marked L (left) or R (right). Then, push one of the four arrow buttons to move the mirror in the direction the arrow is pointing.
Models With Express Window Feature
Push and release the mirror select button marked L (left) or R (right). Then, push one of the four arrow buttons to move the mirror in the direction the arrow is pointing. The selection times out after 30 seconds of inactivity in order to guard against accidentally changing a mirror position following an adjustment.
Note:
A light in the selected button will illuminate indicating the mirror is activated and can be adjusted.
HEATED MIRRORS — IF EQUIPPED
These mirrors are heated to melt frost or ice. This feature will be activated whenever you turn on the rear window defroster (if equipped).
Refer to “Climate Controls” in this chapter for further information.
POWER FOLDING MIRRORS — IF EQUIPPED
The switch for the power folding mirrors is located between the power mirror switches L (left) and R (right). Push the switch once and the mirrors will fold in, pushing the switch a second time will return the mirrors to the normal driving position.
Power Folding Mirror Switch
Note:
If the vehicle speed is greater than 10 mph (16 km/h), the folding feature will be disabled.
If the mirrors are in the folded position, and vehicle speed is equal or greater than 10 mph (16 km/h), they will automatically unfold.
Resetting The Power Folding Outside Mirrors
You may need to reset the power folding mirrors if the following occurs:
-
The mirrors are accidentally blocked while folding.
-
The mirrors are accidentally manually folded/unfolded.
-
The mirrors come out of the unfolded position.
-
The mirrors shake and vibrate at normal driving speeds.
To reset the power folding mirrors, fold and unfold them by pushing the button (this may require multiple button pushes). This resets them to their normal position.
ILLUMINATED VANITY MIRRORS — IF EQUIPPED
An illuminated vanity mirror is on each sun visor. To use the mirror, rotate the sun visor downward and swing the mirror cover upward. The light will turn on automatically. Closing the mirror cover will turn off the light.
Illuminated Vanity Mirror
SUN VISOR “SLIDE-ON-ROD” FEATURE — IF EQUIPPED
The sun visor “Slide-On-Rod” feature allows for additional flexibility in positioning the sun visor to block out the sun.
-
Fold down the sun visor.
-
Unclip the visor from the center clip.
-
Pull the sun visor toward the inside rearview mirror to extend it.
Download Manual