Gear selector override
If a malfunction occurs and the gear selector cannot be moved out of the PARK position, you can use the following procedure to temporarily move the gear selector:
-
Turn the engine off.
-
Firmly apply the parking brake.
-
Open the center console and remove the gear selector override access cover (located in the front lower right corner of the console storage bin).
Gear Selector Override Access Cover
-
Press and maintain firm pressure on the brake pedal.
-
Insert a screwdriver or similar small tool into the access port, and push and hold the override release lever forward.
Gear Selector Override Access Cover Removal
-
Move the gear selector to the NEUTRAL position.
-
The vehicle may then be started in NEUTRAL.
-
Reinstall the gear selector override access cover.
Download Manual