Replacing key battery
The access key fob/transmitter battery may be discharged under the following conditions.
The operation of the keyless access function is unstable.
The operating distance of the remote keyless entry system is unstable.
The transmitter does not operate prop- erly when used within the standard dis- tance.
Replace the battery with a new one.
Safety precautions
NOTE
Replace only with the same or equivalent type of battery recom- mended by the manufacturer.
Dispose of used batteries according to local laws.
Mount the battery in the correct orientation to prevent fluid leakage. Be careful not to bend the terminals. It may result in a malfunction.
It is recommended that the battery be replaced by a SUBARU dealer.
Use a new battery.
After replacing the battery, confirm that the transmitter functions properly.
492 Replacing key battery
Release button
Emergency key
Take out the emergency key.
Wrap a flat-head screwdriver with vinyl tape or a cloth, and insert it in the gap to remove the cover.
Take out the battery using a flat-head screwdriver with vinyl tape or a cloth.
Insert a new battery with its positive (+) side facing upward as shown in the figure.
Attach the cover to the access key fob by fitting the projections and recesses together.
Wrap a flat-head screwdriver with vinyl tape or a cloth. Open the key head using a flat-head screwdriver.
Remove the transmitter case from the key head.
Open the transmitter case by releasing the hooks.
Negative (−) side facing up
Replace the old battery with a new battery making sure to install the new battery with the negative (−) side facing up.
Put together the transmitter case by fitting the hooks on the case.
Reinstall the transmitter case in the key head.
Refit the removed half of the key head.
Specifications
12-1. Specifications 496
12-2. Fuses and circuits 503
12-3. Bulb chart 507
12-4. Vehicle identification 511
12
Download Manual