Engine hood
If the wiper blades are lifted off the windshield, return them to their original position.
Pull the hood release knob under the instrument panel.
456 Engine hood
Release the secondary hood release by moving the lever between the front grille and the hood toward the left.
Grip
Lift up the hood, release the hood prop from its retainer and put the end of the
hood prop into the slot in the hood. Hold the grip to handle the hood prop.
Lift the hood slightly and remove the hood prop from the slot in the hood and return the prop to its retainer.
Lower the hood to a height of approxi- mately 5.9 in (15 cm) above its closed position and then let it drop.
After closing the hood, be sure the hood is securely locked.
If this does not close the hood, release it from a slightly higher position.
Download Manual