ENGINE BREAK-IN RECOMMENDATIONS — DIESEL ENGINE
The diesel engine does not require a break-in period due to its construction. Normal operation is allowed, providing the following recommendations are followed:
Warm up the engine before placing it under load.
Do not operate the engine at idle for prolonged periods.
Observe vehicle oil pressure and tempera- ture indicators.
Check the coolant and oil levels frequently.
Vary throttle position at highway speeds when carrying or towing significant weight.
Light duty operation such as light trailer towing or no load operation will extend the time before the engine is at full efficiency. Reduced fuel economy and power may be seen at this time.
The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consistent with
anticipated climate conditions under which vehicle operations will occur. For the recommended viscosity and quality grades page 475.
NON-DETERGENT OR STRAIGHT MINERAL OILS MUST NEVER BE USED.
Download Manual