2020 Lincoln MKZ Owners Manual - Memory function

Memory function

WARNING:  Before activating the memory seat, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts.    WARNING:  Do not use the memory function when your vehicle is moving.

This feature recalls the position of the following features:

• Driver seat.
• Power mirrors.
• Power steering column.

The memory control is on the driver door.

SAVING A PRESET POSITION

1. Adjust the memory features to your preferred position.
2. Press the SET button until you hear a single tone.
3. Press the preferred preset button until you hear a single tone.

You can save up to two preset memory positions at any time.

RECALLING A PRESET POSITION

Press and release the preset button associated with your preferred driving position. The memory features move to the position stored for that preset.

Note:   You can only recall a preset memory position when you switch the ignition off, or when the transmission is in park (P) or neutral (N) if the ignition is on and the vehicle is not moving.

You can also recall a preset memory position by:

• Pressing the unlock button on your remote control if it is linked to a preset position.
• Unlocking the intelligent driver door handle if a linked remote control is present.

Note:   Using a linked remote control to recall your memory position when the ignition is off moves the seat to the easy entry position.

Note:   Pressing any active memory feature control, or any memory button, during a memory recall cancels the operation.

LINKING A PRESET POSITION TO YOUR REMOTE CONTROL

Your vehicle can save the preset memory positions for up to two remote controls.

After you have saved your preferred memory preset positions:

1. Press and hold the preferred preset button for about three seconds until you hear two tones.

1. Within three seconds, press the lock button on the remote control you are linking.

To unlink a remote control, follow the same procedure – except in step 2, press the unlock button on the remote control.

Note:   If more than one linked remote control is in range, the memory function moves to the settings of the first key to initiate a memory recall.

EASY ENTRY AND EXIT FEATURE

If you enable the easy entry and exit feature, it moves the driver seat position rearward up to 2 in (5 cm) when you switch the ignition off.

The driver seat returns to the previous position when you switch the ignition on.

You can enable or disable this feature through the information display.   See   General Information.