Disclaimer: Not affiliated with or endorsed by Lincoln Motor Company. For informational purposes only. Full Disclaimer

2020 Lincoln MKZ Owners Manual - Head restraints



Head restraints

WARNING   WARNING:  Fully adjust the head restraint before you sit in or operate your vehicle. This will help minimize the risk of neck injury in the event of a crash. Do not adjust the head restraint when your vehicle is moving.
WARNING   WARNING:  The adjustable head restraint is a safety device. Whenever possible, it should be installed and properly adjusted when the seat is occupied. Failure to adjust the head restraint properly could reduce its effectiveness during certain impacts.
WARNING   WARNING:  Install the head restraint properly to help minimize the risk of neck injury in the event of a crash.

 

Note:   Adjust the seatback to an upright driving position before adjusting the head restraint. Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible. Make sure that you remain comfortable. If you are extremely tall, adjust the head restraint to its highest position.

FRONT SEAT HEAD RESTRAINT

Rear Seat Headrest

REAR SEAT OUTBOARD HEAD RESTRAINTS

Rear Outboard Head Restraint

REAR CENTER HEAD RESTRAINT

Adjust the Seat Head Restraint

THE HEAD RESTRAINTS CONSIST OF:

Aan energy absorbing head restraint
Btwo steel stems
Cguide sleeve adjust and unlock button
Dguide sleeve unlock and remove button

ADJUSTING THE HEAD RESTRAINT

RAISING THE HEAD RESTRAINT

Pull the head restraint up.

LOWERING THE HEAD RESTRAINT

  1. Press and hold button C.
  2. Push the head restraint down.

REMOVING THE HEAD RESTRAINT

  1. Pull the head restraint up until it reaches its highest position.
  2. Press and hold buttons C and D.
  3. Pull the head restraint up.

INSTALLING THE HEAD RESTRAINT

Align the steel stems into the guide sleeves and push the head restraint down until it locks.

TILTING HEAD RESTRAINTS

The front head restraints have a tilting feature for extra comfort. To tilt the head restraint, do the following:

Tilting Head Restraint

  1. Adjust the seatback to an upright driving or riding position.
  1. Pivot the head restraint forward toward your head to the desired position.

After the head restraint reaches the forward-most tilt position, pivoting it forward again will then release it to the rearward, untilted position.


Download Manual