Wiper Operation
The windshield wipers and washers can be used when the vehicle is on.
Front Wipers
Pull to use washer.
Intermittent time
adjustment ring
MIST
OFF
INT*: Low speed intermittent
LO: Low speed wipe
HI: High speed wipe
Move the wiper lever up or down to the desired position.
Headlight-Wiper Integration*
When the headlights are in the AUTO position, they automatically turn on when you operate the front wipers several times within a certain interval. The headlights turn off shortly after the wipers are turned off, or if there is enough ambient light.
Intermittent Wipers*
Lower speed, fewer sweeps
Higher speed, more sweeps
When you move the lever to the INT position, the wipers operate based on the wiper delay.
Adjust the wiper delay using the intermittent time adjustment ring.
Rear Wiper
When you shift to Reverse (R) and the front wipers are activated, the rear wiper activates even if the switch is off.
ON
INT: Intermittent wipe
OFF
Washer
Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.
In cold weather, the blades may freeze to the windshield, becoming stuck. Operating the wipers in this condition may damage the wipers. Use the defroster or heated windshield button* to warm the windshield, or manually clear the windshield of ice and snow before turning on the wipers.
*if equipped
- One-Touch Turn Signal
- Interior and Exterior Lights
- Smart Entry System*
Download Manual