Disclaimer: Not affiliated with or endorsed by Dodge Motor Company. For informational purposes only. Full Disclaimer

2021 Dodge Charger Owners Manual - TRUNK



TRUNK

The trunk may be opened in several ways:

Power trunk release button on the instru- ment panel
Trunk button on the key fob
Trunk Passive Entry button page 22
External release switch located on the under- side of the decklid overhang

The release feature will function only when the vehicle is unlocked.

 

With the ignition in the ON/RUN position, the trunk open symbol will display in the instrument cluster indicating that the trunk is open. The odometer display will reappear once the trunk is closed.

With the ignition in the OFF position, the trunk open symbol will display until the trunk is closed.

The trunk can be opened from inside the vehicle using the power trunk release button located on the instrument panel to the left of the

steering wheel.

The transmission must be in PARK before the button will operate.

Push the power trunk button on the key fob twice within five seconds to release the trunk.

 

Push the trunk passive entry button which is located on the right side of the trunk lid. With a valid Passive Entry key fob within 5 ft (1.5 m) of the trunk, push the passive entry button to open the trunk.

Trunk Passive Entry Button

With one or more hands placed on the outside trunk surface push the trunk lid down until you hear the trunk lock latch into place.

Before closing the trunk lid, make sure your key fob is not inside the trunk area. The trunk will latch then automatically unlock if the key fob is sensed, not allowing the key fob to be locked in the trunk area.

Trunk Emergency Release

As a security measure, a trunk internal emergency release lever is built into the trunk latching mechanism. In the event of an individual being locked inside the trunk, the trunk can be opened by actuating the

glow-in-the-dark handle attached to the trunk latching mechanism.

 

Trunk Emergency Release

60/40 Split-Folding Rear Seat — If Equipped

The 60/40 split-folding rear seat provides

cargo-carrying versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they provide a continuous,

nearly-flat extension of the trunk load floor.

When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap.


Download Manual