Using the Bluetooth® audio system
Bluetooth® audio system
The Bluetooth® audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication.
This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your portable player does not support Bluetooth®, the Bluetooth® audio system will not function.
- Vehicles with a navigation system
Refer to the “Navigation System Owner’s Manual”.
- Vehicles without a navigation system
- Conditions under which the system will not operate
- If using a portable player that does not support Bluetooth®
- If the portable player is switched off
- If the portable player is not connected
- If the portable player’s battery is low
- If the portable player is behind the seat or in the glove box or console box
- If metal is covering or touching the portable player
- When transferring ownership of the vehicle
Be sure to initialize the system to prevent personal data from being improperly accessed.
- About Bluetooth®
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
- Compatible models
- Bluetooth® specifications:
Ver. 1.2, or higher (Recommended: Ver. 2.0+EDR or higher)
- Following Profiles:
- A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher
- AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver. 1.3 or higher recommended)
Portable players must correspond to the above specifications in order to be connected to the Bluetooth® audio system. However, please note that some functions may be limited depending on the type of portable player.
Please go to “http://www.toyota.com/bluetooth” to find approved Bluetooth® phones for this system.
- Certification for the Bluetooth® audio system
FCC ID: AJDK018
MADE IN JAPAN
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
| CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 7.9 in. (20 cm) and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and legs). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Do not connect portable players or operate the controls.
|
| NOTICE
Do not leave portable players in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player. |
Using the Bluetooth® audio system
- Audio unit
- Display
A message, name, number, etc. is displayed.
Lower-case characters and special characters cannot be displayed.
- Displays information that is too long to be displayed at one time on the display (press and hold)
- Selects items such as menu and number
Turn: Selects an item Press: Inputs the selected item
- Bluetooth® connection condition
If “BT” is not displayed, the Bluetooth® audio system cannot be used.
Operating the system using voice commands
By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio system without the need to check the display or operate 
.
- Operation procedure when using voice commands
Press the talk switch and follow voice guidance instructions.
- Auxiliary commands when using voice commands
The following auxiliary commands can be used when operating the system using a voice command:
Cancel: Exits the Bluetooth® audio system Repeat: Repeats the previous voice guidance instruction Go back: Returns to the previous procedure Help: Reads aloud the function summary if a help comment is registered for the selected function
Using the Bluetooth® audio system for the first time
Before using the Bluetooth® audio system, it is necessary to register a Bluetooth® enabled portable player in the system. Follow the procedure below to register (pair) a portable player:
STEP 1
Press 
and select “BT•A MENU” using 
.
STEP 2
Press the talk switch or select “BT•A Setup” using 
.
The introductory guidance and portable player name registration instructions are heard.
STEP 3
Select “Pair Audio Player (Pair Audio)” using a voice command or 
.
STEP 4
Register a portable player name by either of the following methods:
- Select “Record Name” using
, and say the name to be registered. - Press the talk switch and say the name to be registered.
A voice guidance instruction to confirm the input is heard.
STEP 5
Select “Confirm” using a voice command or .
A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the portable player is heard.
Input the passkey into the portable player.
Refer to the manual that comes with the portable player for the operation of the portable player.
Guidance for registration completion is heard.
If the portable player has a Bluetooth® phone, the phone can be registered at the same time. A voice guidance instruction to register a Bluetooth® phone is heard.
STEP 7
Select “Yes” or “No” using a voice command or .
Menu list of the Bluetooth® audio system
- Normal operation
| First menu
|
Second menu
|
Third menu
|
Operation detail
|
| “Setup” | “BT•A Setup” | “Pair Audio” | Registering a portable player |
| “Connect” | Selecting a portable player to be used | ||
| “Change Name” | Changing the registered name of a portable player | ||
| “List Audios” | Listing the registered portable players | ||
| “Set Passkey” | Changing the passkey | ||
| “Delete Audio” | Deleting a registered portable player | ||
| “System Setup” | “Guidance Vol” | Setting voice guidance volume | |
| “Device Name” | Displaying the Bluetooth® device address and name | ||
| “Initialize” | Initializing the system |
- When using a voice command
For numbers, say a combination of single digits from zero to nine.
Say the command correctly and clearly.
- Situations that the system may not recognize your voice
- When driving on rough roads
- When driving at high speeds
- When air is blowing out of the vents onto the microphone
- When the air conditioning fan emits a loud noise
- Operations that cannot be performed while driving
- Operating the system with
- Registering a portable player to the system
- Changing the passkey
Download Manual