Instrument cluster
Gauges and meters
- Tachometer
Displays the engine speed in revolutions per minute
- Engine coolant temperature gauge
Displays the engine coolant temperature
- Fuel gauge
Displays the quantity of fuel remaining in the tank
- Speedometer
Displays the vehicle speed
- Voltmeter
Displays the charge state
- Multi-information display
Presents the driver with a variety of driving-related data
- Odometer and trip meter
Odometer: Displays the total distance the vehicle has been driven Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
- Engine oil pressure gauge
Displays the engine oil pressure
- Odometer/trip meter display change button
Switches between odometer and trip meter displays
- Instrument panel light control dial
The brightness of the instrument panel light can be adjusted
Switching the display
Pressing this button switches between odometer and trip meter.
- Odometer
- Trip meter A*
- Trip meter B*
*:Pushing and holding the button will reset the trip meter.
Eco Driving Indicator Light customization
Eco Driving Indicator Light can activated or deactivated.
While the odometer is being displayed, press and hold the odometer/trip meter display change button to display the Eco Driving Indicator Light customization screen.
STEP 2
Press the odometer/trip meter display change button to set Eco Driving Indicator Light to on or off.
STEP 3
Press and hold the odometer/trip meter display change button to complete the setting.
Instrument panel light control
The brightness of the instrument panel lights can be adjusted.
- Darker
- Brighter
- The meters and display illuminate when
The “ENGINE START STOP” switch is in IGNITION ON mode.
- The brightness of the instrument panel lights
When the tail lights are turned on, the meter’s brightness will be reduced slightly unless the meter brightness level adjustment is set to the brightest setting.
If the tail lights are turned on when the surroundings are dark, the meter’s brightness will reduce slightly. However, when the surroundings are bright, such as during the daytime, the meter’s brightness will not be reduced even if the tail lights are turned on.
| NOTICE
When the voltmeter indicates 19 V or higher or 9 V or lower while the engine is running, there may be a battery or charging system malfunction. Have the vehicle inspected at your Toyota dealer.
When the value of the engine oil pressure gauge drops while the engine is running, stop the vehicle in a safe place immediately and check the amount of engine oil. When the oil pressure drops even though the engine oil amount has not decreased, or if the oil pressure does not increase when engine oil is added, contact your Toyota dealer, as there may be a problem with the lubrication system. |
Indicators and warning lights
The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems.
For the purpose of explanation, the following illustration displays all indicators and warning lights illuminated.
- Instrument cluster
- Center panel (vehicles with navigation system)
- Center panel (vehicles without navigation system)
- Indicators
The indicators inform the driver of the operating state of the vehicle’s various systems.
Turn signal indicator
Headlight high beam indicator
Headlight indicator
Fog light indicator
Cruise control indicator
Slip indicator
Crawl Control indicator
VSC OFF indicator
“SET” indicator
Multi-terrain Select indicator
Eco Driving Indicator Light
Roll sensing of curtain shield airbags off indicator
“PWR” mode indicator
Automatic transmission second start indicator
Low speed four-wheel drive indicator light
Center differential lock indicator
“AIR BAG ON/OFF” indicator
Dynamic radar cruise control indicator
Turn Assist function indicator
*1: These lights turn on when the “ENGINE START STOP” switch is turned to IGNITION ON mode to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
*2: The light flashes to indicate that the system is operating.
- Warning lights
Warning lights inform the driver of malfunctions in the indicated vehicle’s systems.
*1: These lights turn on when the “ENGINE START STOP” switch is turned to IGNITION ON mode to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
*2: Vehicles with navigation system
*3: Vehicles without navigation system
| CAUTION
Should a safety system light such as Multi Terrain ABS and the SRS airbag warning lights not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs. |
Multi-information display
The multi-information display presents the driver with a variety of driving-related data.
- Trip information
Displays driving range, fuel consumption and other cruising related information.
- Speedometer
- Turn-by-turn navigation (vehicles with a navigation system)
- Front tire angle
- Tire inflation pressure
- Intuitive parking assist -sensor display
Automatically displayed when using toyota parking assist-sensor.
- Dynamic radar cruise control display (if equipped)
Automatically displayed when using dynamic radar cruise control.
- Multi-terrain Select display
- Crawl Control display
- Shift position and shift range
Displays the selected shift position or selected shift range.
- Warning messages
Automatically displayed when a malfunction occurs in one of the vehicle’s system.
Switching the display
Display items can be switched by pressing the “DISP” switch.
Display items
- Average fuel consumption and Eco Driving Indicator Zone Display
Displays the average fuel consumption since the function was reset
- The function can be reset by pressing the “DISP” switch for longer than 1 second when the average fuel consumption is displayed.
- Use the displayed average fuel consumption as a reference.
- Average fuel consumption after refueling
Displays the average fuel consumption since the vehicle was last refueled Use the displayed average fuel consumption as a reference.
- Current fuel consumption
Displays the current rate of fuel consumption
- Driving range
Displays the estimated maximum distance that can be driven with the quantity of fuel remaining
- This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
- When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the “ENGINE START STOP” switch off. If the vehicle is refueled without turning the “ENGINE START STOP” switch off, the display may not be updated.
- Speedometer
Displays the vehicle speed.
The speed units (MPH or km/h) can be selected by pressing the “DISP” switch for longer than 1 second when the speedometer is displayed
- Average vehicle speed
Displays the average vehicle speed since the engine was started or the function was reset The function can be reset by pressing the “DISP” switch for longer than 1 second when the average vehicle speed is displayed.
- Front tire angle
Displays the direction of the front tires The tire direction is displayed in 3 stages for both left and right, in accordance with the angle of the tire.
- Tire inflation pressure
Displays inflation pressure of each tire.
There is no correlation between the order of the displayed values and the tire positions.
If the inflation pressure of any tire drops a certain amount below the tire inflation pressure value currently memorized in the system, the displayed values will be highlighted.
It may take a few minutes to display the tire inflation pressure after the “ENGINE START STOP” switch is turned to IGNITION ON mode. It may also take a few minutes to display the tire inflation pressure after inflation pressure has been adjusted.
If the tire pressure warning light is on or flashing, a message describing the situation will be displayed.
- Turn-by-turn navigation setting screen (vehicles with a navigation system)
The turn-by-turn navigation can be set to on or off.
The function can be activated or deactivated by pressing the “DISP” switch for longer than 1 second when turn-by-turn navigation setting screen is displayed.
- Display off
A blank screen is displayed
- System check display
After turning the “ENGINE START STOP” switch to IGNITION ON mode, “LAND CRUISER” is displayed while system operation is checked. When the system check is complete, the normal screen will return.
- Turn-by-turn navigation (vehicles with navigation system)
The turn-by-turn navigation appears only while route guidance of the navigation system is being performed. When a turn approaches, the distance to the turn and the turn direction are displayed.
- Turn direction
- Distance to the next turn
The image shown may differ from the actual intersection.
- When disconnecting and reconnecting battery terminals
The following information data will be reset:
- Average fuel consumption after refueling
- Average fuel consumption
- Average vehicle speed
| CAUTION
Allow the interior of the vehicle to warm up before using the information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or serious injury. |
Download Manual