Enthusiast Network

Disclaimer: Not affiliated with or endorsed by Nissan Motor Company. For informational purposes only. Full Disclaimer
Home Info Manuals Manuals 2015 Manuals 2015

2015 Nissan Sentra Owners Manual - Increasing fuel economy



Owner’s Manuals 2015 Increasing fuel economy

Increasing fuel economy

  • Keep your engine tuned up.
  • Follow the recommended scheduled maintenance.
  • Keep the tires inflated to the correct pressure.

    Low tire pressure increases tire wear and lowers fuel economy.

  • Keep the wheels in correct alignment. Improper alignment increases tire wear and lowers fuel economy.
  • Use the recommended viscosity engine oil.

    See “Engine oil and oil filter recommendations” in “Technical and consumer information” in this manual.

Parking/parking on hills

WARNING
  • Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire.
  • Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) for CVT models or in an appropriate gear for manual transmission models. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in an accident. Make sure the shift lever has been pushed as far forward as it can go and cannot be moved without depressing the foot brake pedal.
  • Never leave the engine running while the vehicle is unattended.
  • Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents.
  1. Firmly apply the parking brake.
  2. Manual transmission models:

Place the shift lever in the R (Reverse) position.

When parking on an uphill grade, place the shift lever in 1st gear.

Continuously Variable Transmission (CVT) models: Move the shift lever into the P (Park) position.

  1. To help prevent the vehicle from rolling into traffic when parked on an incline, it is a good practice to turn the wheels as illustrated.
  • HEADED DOWNHILL WITH CURB: 1 Turn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb.
  • HEADED UPHILL WITH CURB: 2 Turn the wheels away from the curb and move the vehicle back until the curb side wheel gently touches the curb.
  • HEADED UPHILL OR DOWNHILL, NO CURB: 3 Turn the wheels toward the side of the road so the vehicle will move away from the center of the road if it moves.
  1. Place the ignition switch in the LOCK position and remove the key.
Previous Next

Download Manual