2022 Jeep Compass Owners Manual - Driver Memory Settings — If Equipped

Driver Memory Settings — If Equipped

This feature allows the driver to save up to two different memory profiles for easy recall through a memory switch. Each memory profile saves desired position settings for the following features:

• Driver seat position

• Easy Entry/Exit seat (if equipped)

• A set of desired radio station presets

Note:

Your vehicle is equipped with two key fobs, each can be linked to either memory position 1 or 2.

The memory setting switch is located on the driver’s door trim panel. The switch consists of three buttons:

• The set (S) button, which is used to activate the memory save function.

• The (1) and (2) buttons which are used to recall either of two saved memory profiles.

>Memory Switches

PROGRAMMING THE MEMORY FEATURE

To create a new memory profile, perform the following:

Note:

Saving a new memory profile will erase an existing profile from memory.

1. Place the vehicle’s ignition in the ON position.

2. Adjust all memory profile settings to desired preferences (i.e., seat and radio station presets).

3. Push the set (S) button on the memory switch, and then push the desired memory button (1 or 2) within five seconds. The instrument cluster display will display which memory position is being set.

Note:

Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to recall a memory profile.

LINKING AND UNLINKING THE REMOTE KEYLESS ENTRY KEY FOB TO MEMORY

Your remote keyless entry key fob can be programmed to recall one of two saved memory profiles.

Note:

Before programming your key fob you must select the “Memory Linked To FOB” feature through the Uconnect Settings "⇨UCONNECT SETTINGS".

To program your key fob, perform the following:

1. Place the vehicle’s ignition in the OFF position.

2. Select the desired memory profile (1) or (2).

3. Push and release the set (S) button on the memory switch, then within five seconds push and release the button labeled (1) or (2) accordingly. “Memory Profile Set” (1 or 2) will display in the instrument cluster display.

4. Push and release the lock button on the key fob within 10 seconds.

Note:

Your key fob can be unlinked from your memory settings by pushing the set (S) button, followed by pushing the unlock button on the key fob within 10 seconds.

MEMORY POSITION RECALL

Note:

The vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle is not in PARK, a message will display in the instrument cluster display.

To recall the memory settings for driver one or two, push the desired memory button number (1 or 2) or the unlock button on the key fob linked to the desired memory position.

A recall can be canceled by pushing any of the memory buttons (S, 1, or 2) during a recall. When a recall is canceled, the driver seat will stop moving. A delay of one second will occur before another recall can be selected.