Refueling
Refueling System Overview
| A B C |
Your vehicle does not have a fuel tank filler cap.
| A B C D |
Refueling Your Vehicle
- Fully open the fuel filler door.
- Select the correct fuel pump nozzle for your vehicle.
- Insert the fuel pump nozzle up to the first notch on the nozzle A.Keep the fuel pump nozzle resting on the fuel tank filler pipe.
- Hold the fuel pump nozzle in position B when refueling.Holding the fuel pump nozzle in position A can affect the flow of fuel and shut off the fuel pump nozzle before the fuel tank is full.
- Operate the fuel pump nozzle within the area shown.
- When you finish refueling slightly raise the fuel pump nozzle and slowly remove it.
- Fully close the fuel filler door.
Do not attempt to start the engine if you have filled the fuel tank with incorrect fuel. Incorrect fuel use could cause damage not covered by the vehicle Warranty. Have your vehicle immediately checked.
Refueling System Warning (If Equipped)
If the fuel tank filler valve does not fully close, a message could appear in the information display.
| Message |
|---|
|
Check Fuel Fill Inlet |
If the message appears, do the following:
- Stop your vehicle as soon as it is safe to do so and switch the engine off.
- Shift into park (P) or neutral (N).
- Apply the parking brake.
- Fully open the fuel filler door.
- Check the fuel tank filler valve for any debris that may be restricting its movement.
- Remove any debris from the fuel tank filler valve.
- Fully insert a fuel pump nozzle or the fuel filler funnel provided with your vehicle into the fuel filler pipe. See Fuel Filler Funnel Location. This action should dislodge any debris that may be preventing the fuel tank filler valve from fully closing.
- Remove the fuel pump nozzle or fuel filler funnel from the fuel filler pipe.
- Fully close the fuel filler door.
Note: The message may not immediately reset. If the message continues to appear and a warning lamp illuminates, have your vehicle checked as soon as possible.
Download Manual