2021 Toyota Tundra Owners Manual - Adjusting the steering wheel and mirrors

Adjusting the steering wheel and mirrors

Vehicles with front bench type seat

Adjust to the ideal position by moving the steering wheel.

After adjustment, pull the lever up to secure the steering wheel.

Adjust to the ideal position by moving the steering wheel hori- zontally and vertically.

After adjustment, pull the lever up to secure the steering wheel.

Up Down

Toward the driver Away from the driver

To sound the horn, press on or close to the mark.

After adjusting the steering wheel (manual adjustable type)

Make sure that the steering wheel is securely locked.

The horn may not sound if the steering wheel is not securely locked. (P. 161)

off, the steering wheel returns to its stowed position by moving up and away to enable easier driver entry and exit.

Turning the engine switch to ACC or ON mode will return the steering wheel to the original position.

The steering wheel can be adjusted when (power adjustable type)

The engine switch is in ON.

Automatic adjustment of the steering position (power adjustable type) A desired steering position can be entered to memory and recalled automati- cally by the driving position memory system. (P. 152)

Power easy access system (vehicles with driving position memory)

The steering wheel and driver’s seat move in accordance with engine switch position and the driver’s seat belt condition. (P. 152)

Adjust the height of the rear view mirror by moving it up and down.

Manual anti-glare inside rear view mirror

Reflected light from the headlights of vehicles behind can be reduced by operating the lever.

Normal position Anti-glare position

Auto anti-glare inside rear view mirror

Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced.

Changing automatic anti-glare function mode

ON/OFF

When the automatic anti-glare function is in ON mode, the indica- tor illuminates.

The function will set to ON mode each time the engine switch is turned to ON.

Pressing the button turns the func- tion to OFF mode. (The indicator also turns off.)

To prevent sensor error (vehicles with auto anti-glare inside rear view mirror)

To ensure that the sensors operate prop- erly, do not touch or cover them.

If a sun visor interferes with the mirror

Hold and rotate the mirror to adjust the support.

Adjust the mirror up and down, in or out by pushing the mirror sur- face.

Power-adjustable type (type A)

To select a mirror to adjust, press the switch.

Left Right

To adjust the mirror, press the switch.

Up Right Down Left

Power-adjustable type (type B) Upper part mirror:

To select a mirror to adjust,

press the switch.

Left Right

To adjust the mirror, press the switch.

Up Right Down Left

Lower part mirror:

Adjust the mirror up and down, in or out by pushing the mirror sur- face.

From outside

Push the mirror back in the direc- tion of the vehicle’s rear.

From inside (if equipped)

Press the switch to fold the mir- rors.

Press it again to extend them to the original position.

When the mirror select switch is in the L or R position, the outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground.

To disable this function, move the mirror select switch to the neutral position (between L and R).

Adjusting the mirror angle when the vehicle is reversing

With the shift lever in R, adjust the mirror angle at a desired posi- tion. The adjusted angle will be memorized and the mirror will auto- matically tilt to the memorized angle whenever the shift lever is shifted to R from next time.

The memorized downward tilt position of the mirror is linked to the nor- mal position (angle adjusted with the shift lever in other than R). There- fore, if the normal position is changed after adjustment, the tilt position will also change.

When the normal position is changed, readjust the angle in reversing.

Recommended mirror angle when towing a trailer (vehicles with extend- ing mirrors)

Power adjust the upper part of the mir- ror until an appropriate view is obtained. It is recommended that the outer 2/3 of the upper mirror be filled with images other than the vehicle and trailer.

Manually adjust the lower part of the mirror until an appropriate view of the towed object is obtained. It is recom- mended that the outer 2/3 of the lower mirror be filled with images other than the trailer.

Mirror operating conditions (power-adjustable type)

The engine switch is in ACC or ON.

When the mirrors are fogged up (vehicles with outside rear view mirror defoggers)

Turn on the mirror defoggers to defog the mirrors. (P. 342, 349)

Automatic adjustment of the mirror angle (vehicles with driving position memory)

A desired mirror face angle can be entered to memory and recalled automati- cally by the driving position memory. (P. 152)

Auto anti-glare function (if equipped)

When the anti-glare inside rear view mirror is set to automatic mode, the out- side rear view mirrors will activate in conjunction with the anti-glare inside rear view mirror to reduce reflected light. (P. 165)

WARNING

Important points while driving

Observe the following precautions while driving.

Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury.

Do not adjust the mirrors while driving.

Do not drive with the mirrors folded.

Both the driver and passenger side mirrors must be extended and properly adjusted before driving.

When a mirror is moving (power-adjustable type)

To avoid personal injury and mirror malfunction, be careful not to get your hand caught by the moving mirror.

When the mirror defoggers are operating (vehicles with outside rear view mirror defoggers)

Do not touch the rear view mirror surfaces, as they can become very hot and burn you.