Speed Limiter
Principle of Operation
 WARNING: When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes. WARNING: The system is designed to aid the driver. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention. |
The system allows you to set a speed to which your vehicle becomes limited. The set speed sets the effective maximum speed of your vehicle. You can temporarily exceed the set speed if required, for example to overtake.
Using Speed Limiter
The controls are on the steering wheel.
Switching the System On and Off
 Press to set the system in standby mode. Press again to switch the system off. |
Setting the Speed Limiter
  Press the toggle button upward or downward with the system in standby mode to set the speed limiter to the current vehicle speed. The set speed is stored and displayed in the information display.
You can adjust the set speed in small or large increments. Press the toggle button upward or downward once to adjust the set speed in small increments. Press and hold the toggle button upward or downward to adjust the set speed in large increments. |
Canceling the Set Speed
 Press to cancel the set speed limiter. The system returns to standby mode. |
Resuming the Set Speed
 Press to resume the set speed limiter. |
Intentionally Exceeding the Speed Limit
Firmly press the accelerator pedal to temporarily exceed the set speed limit. The system resumes when the vehicle speed drops below the set speed limit, or when you press the RES button.
System Warnings
If you intentionally exceed the set speed, a warning appears in the information display.
If you unintentionally exceed the set speed, for example when you are going downhill, a warning appears in the information display and a tone sounds.
Download Manual