Removing a Rear Lamp
Brake Lamp, Rear Lamp and Direction Indicator
- Carefully cut the trim to access the lamp release wing nut.
- Turn the wing nut counterclockwise to release the lamp.
Note: You cannot fully remove the wing nut.
- Remove the lamp.
- Disconnect the electrical connector.
- To install, reverse the removal procedure.
Reversing Lamp
- Open the liftgate.
- Carefully remove the cover.
- Turn the wing nut counterclockwise and remove it.
- Remove the lamp.
- Disconnect the electrical connector.
- To install, reverse the removal procedure.
Download Manual